|
Here are 2017 press release archive pages
1 |
2 |
3 |
4 |
5
 At IMS 2017, everything RF has introduced the most
powerful
website builder tool for product driven engineering companies. You no
longer need to go to a developer or agency and spend large amounts of money to get your website
developed. BuildBot.io starts at only $100 / month and enables you to build a powerful website
where you can add your complete product catalog, press releases / news stories, events, distributors,
application notes and white papers and much more. Lead generation is also built in to the
platform, allowing you ...
 Withwave's
Vertical Launch Connectors
are specially designed for solderless vertical PCB launch on test & measurement board.
These connectors have excellent electrical transition performance up to 50 GHz as well
as reduce installation time by eliminating soldering. DC to 50 GHz, 2.4 mm type
(female, male), excellent vertical transition
(VSWR <1.3), easy & solderless installation on designed
substrate ...
 The
TTRM1010 is a Bi-Directional SSPA for small to medium size UAS applications.
In addition to its broad frequency range it also contains internal DC conversion circuitry
that allows it to be powered by an input voltage range of 9-36 VDC. This class A GaAs
module is designed for both military and commercial applications. It is capable of supporting
any signal type and modulation format, including but not limited to 3-4G telecom, WLAN, OFDM,
DVB, and CW/AM/FM. The latest device technologies and design methods are employed ...
 The Electronic Design Innovation Conference and Exhibition
(EDI CON) USA, the first industry event to bring together RF/microwave and high-speed digital
design engineers and system integrators, announced today the addition of the
European Radar Summit to its conference program at the Hynes Convention
Center, September 11-13 in Boston, Mass. EDI CON USA 2017 is building on its inaugural 2016
conference with multiple parallel tracks covering RF/microwave, high-speed digital and EMC/EMI
topics. The conference features extended tutorials and short courses on ...
 Southwest Antennas, an industry leader in innovative
rugged RF / microwave antennas and accessory products, has released a newGPS passive L1 antenna with integrated coaxial RF gooseneck, adding to
their existing line of passive and active GPS antenna products for the military, law enforcement,
and commercial markets. The integrated gooseneck allows the GPS antenna to be utilized on
tactical radio systems where multiple antenna RF connectors and control knobs can located
in a small space, giving users the ability to position ...
 ConductRF's
LSA cables
provide one of the most optimum and cost effective solutions for applications as diverse as
alternatives to semi-rigid cabling, where complex forming is required, to easy to install
jumper cables inside densely packaged RF enclosures where EMI is of concern. Using our low
profile SMA and type-N "Swept Cable" configurations, ConductRF can provide R/A assemblies
with no VSWR performance loss when compared ...
 Vaunix,
a leading developer of programmable wireless test devices, will be introducing their latest
attenuators and signal generator in the 5G/IoT Pavilion at booth #848 at IMS 2017 in Honolulu,
Hawaii, June 6th-8th. Capable of bidirectional fixed attenuation, swept attenuation ramps,
and fading profiles, the Vaunix LDA-602Q 4 port programmable attenuator provides up to 120 dB
of control range with a 0.1 dB step size from 200 MHz to 6 GHz. Each of 4 RF
ports of this device has a 50 ohm impedance with VSWR less than ...
 everythingRF will again this year be providing
up-to-the-minute coverage  of
the IMS2017 show in Honolulu ...
 Saelig Company has announced the availability of the
Teledyne LeCroy WaveSurfer 510 oscilloscope, which combines advanced 1 GHz 10 GSa/s
specifications including MAUI with OneTouch user interface, powerful waveform processing,
as well as advanced math, measurement, and debug features, to create an engineering tool that
can help quickly analyze and find the root cause of circuit problems. The 12.1" touch-screen
display of the WaveSurfer 510 is the largest in its class and makes viewing intricate waveforms
fast and easy. The WaveSurfer 510 Oscilloscope ...
 The new TA1205 is a GaN amplifier that operates at 3000-3600 MHz and offers
an output power of up to 10 watts. It boasts a small form factor and light weight, while
keeping a high power output which makes it ideal for ENG Broadcast applications where distance
and mobility is key. This class A, GaN module is designed for both military and commercial
applications. It is capable of supporting any signal type and modulation format, including
but not limited to 3-4G telecom, WLAN, OFDM, DVB ...
 Microwave Journal is now providing Professor Ted Rappaport's 2-day online
course, slides and eBook. Previously recorded by IEEE Com Soc, the course covers the fundamental
communications, circuits, antennas and propagation issues surrounding emerging 60 GHz
wireless LAN and mmWave cellular / backhaul applications. The course was developed and delivered
by Professor Theodore (Ted) Rappaport, a pioneering researcher and educator in mmWave wireless
communications, wireless systems and radio propagation ...
 ConductRF offers Straight & R/A
low PIM connectors
for 7/16, N, SMA, QMA, 4.1/9.5 and 4.3/10 interfaces. PIM levels vary depending on cable and
configuration. We also offer Adapters. Download our datasheets by clicking the pictures above
for more detail of call us at +1 978 374 6840 ...
 National
Instruments (NI) has released
LabVIEW NXG
as a return to more codeless development platform, as it began many moons ago. I used the
DOS versions in the 1990s. Maybe NXG stands for 'next generation,' but more appropriately
it would be 'native generation.' "LabVIEW NXG offers engineering workflows for interactively
acquiring, analyzing, and visualizing data sets. Combined with built-in, drag-and-drop engineering
user interface development and inherent data exploration, LabVIEW NXG is the ideal tool to
turn data collection ..."
 Anatech has introduced 3 new products for your convenience:
a 10 MHz crystal notch filter with SMA connectors, a 2412 MHz WiFi cavity bandpass filter
with SMA connectors, and a 10-900 MHz LC multiplexer with N connectors.
Anatech Electronics offers the industry's largest portfolio of high-performance
standard and customized RF and microwave filters and filter-related products for military,
commercial, aerospace and defense, and industrial applications up to ...
 Teledyne Defence & Space, a business unit of Teledyne
Microwave Solutions, announced today that it has been selected to manufacture over 5,000
Filters and Diplexers to support a space payload application for a large
satellite program. In recognition of the company's expanding portfolio of space-based products
and capabilities, last year the former Teledyne Defence changed its corporate name to Teledyne
Defence & Space (TDS). This new contract award underscores the commitment TDS is bringing
to space market ...
 Antenova, manufacturer of antennas and RF antenna modules
for M2M and the Internet of Things, is announcing a new antenna,
Grandis, part number SR42I010. It is an SMD antenna that is physically
smaller yet provides enhanced performance in the 863-870 MHz and 902-928 MHz bands.
It directly targets the growing number of M2M and IoT applications using the LPWAN protocols.
With Grandis, Antenova has reduced the footprint of the LPWAN antenna to 12.0 x 11.0 x 1.6 mm,
while also enhancing the antenna's performance ...
 Get your SMA torque wrench oiled and calibrated! VidaRF
offers new 64-way power divider model VPD-3442A64, with a frequency
range from 3.4-4.2 GHz. Providing 30 W power as splitter and low insertion loss.
SMA connectors. This model also provides high isolation port to port (≥20 dB) and excellent
amplitude and phase balance (≤±10°). Operating temp -55 to +85 °C . Sealed and painted
to meet IP65 standards ...
 Glenn Robb, owner of Antenna Test Lab Company, wrote
a white paper titled "The
Benefits of Antenna Testing" which is now available on RF Cafe. Since 2001,
AntennaTestLab.com has evaluated countless antennas and RF transmitter
products. With a fully anechoic chamber, antennas can be quickly developed and RF products
refined and deployed. The key phrase in the paper is "...risks of non-testing ... often
lead to impaired wireless system performance and poor product reputations." That applies
to stand-alone, surface mount, and printed antennas. Can you afford to not test? "Wishful
thinking is not a good system test practice ..."
 Dr. Andrei Muller, progenitor of the world's first
3D Smith Chart software program,
has teamed with a handful of able colleagues to release this commercial version of this paradigm-changing
design and analysis tool. 3D Smith Chart enables you to visualize S-parameter data in
ways not possible from the Flatland dweller's perspective that is the traditional 2D Smith
chart. Flatland existed in a plane, and from an observer's perspective a 3-dimensional object
entering the plane from along the Z-axis seemed to appear out of nowhere ...
 Planar Monolithic Industries (PMI) recently introduced
eight new products in their extensive line of RF and microwave components. The most interesting
is the Feasibility Study on PMI RF Radar Sense & Avoid Systems for Small UAS
(Unmanned Aerial Systems), i.e., a drone carrying radar. Also included are a couple 16-way
power combiners, an EW receiver module, an and amplifier. Contact PMI today for more information ...
 Axiom Test Equipment, a provider of efficient and cost
effective solutions customers' test equipment needs, publishes a blog containing how-to
articles and tutorials covering
the use and application of many types of test equipment. Examples include "Measuring Phase
Noise And Why It Matters," "Gain Some Guidance On Amplifier Measurements," "Add an Amplifier
for High-Power RF Testing," and "Considerations In Choosing an Environmental Chamber." Since
2005, Axiom Test Equipment has ...
 This year at
IMS 2017, Pasternack's team of engineers will be in booth #514 promoting
hundreds of newly released products. Since the 2016 exhibition, the company greatly expanded
its portfolio of waveguide products including waveguide direct read attenuators, waveguide
directional couplers, waveguide bends, transitions and much more. Additionally, Pasternack
will be exhibiting new active components including USB controlled PLL synthesizers, high-power
GaN amplifiers, active frequency ...
 Troll's
LinkBox manages IP network payloads, cameras, antennas, encoding, decoding,
encryption, reception and transmission using DVB-T, TCDLs and MIMO. The LinkBox is compatible
with leading mapping interfaces and provides seamless network bridge between air and ground
operations. Its multi-port Ethernet switch and power distribution systems allows for the rapid
integration of third-party equipment, ensuring that ...
 Shown for the first time a NAB Troll's DMR series receivers
combines a multi-channel microwave receiver with a remote site diversity antenna
controller. The combination provides a two (2) to eight (8) channel diversity receiver for
remote Electronic News Gathering (ENG) or law enforcement antenna sites. The DMR processor
performs video decryption, encryption, video and audio decoding for local monitoring and secure
IP transport to remote control centers. The DMR's front panel touchscreen enables live video
and audio preview, control and ...
 Empower RF Systems is conducting
remote
live demonstrations of our broadband, high power 1 kW, 1 to 3 GHz amplifier,
Booth 1007. The amplifier will be housed in Los Angeles and viewed in the Hawaii exhibit venue
with live streaming video while remotely controlling the amplifier from the exhibit floor
through a standard web browser. What you will see is a demonstration of remote operation of
the Empower 2170 1 kW RF amplifier in a test setup that includes a signal generator ...
 On Tuesday, June 6th, Empower RF's CTO, Paulo Correa,
will be presenting the topic "Multi-Use
Interoperable RF Amplifier" to an audience of IMS attendees at the Exhibitor Workshop,
1pm to 3pm, Room 318/319 of the Hawai'i Convention Center. The RF system amplifier has not
evolved in any significant way since the inclusion of the microcontroller twenty years ago.
That's a remarkable statement given the advancements seen in virtually every other application
of RF products and test systems. In this workshop, we will define and evaluate power amplifier ...
 A new NI AWR Design Environment application note describes how the original
design of a simple coffee-can radar from the Massachusetts Institute of Technology (MIT) OpenCourseWare
(OCW) online course was redesigned and optimized using the system, circuit and electromagnetic
(EM) analysis capabilities of NI AWR software. The redesign was done using Visual System Simulator™
(VSS) system-level design software and AXIEM and Analyst™ EM simulators such that the "re-caffeinated"
radar system ...
 ConductRF's FPA
RF Cable Assemblies
provide a cost effective high performance solution for applications typically supported by
Semi-Rigid or high cost flexible precision cables. Our Multi-layer shielded cable provides
both flexibility and form-ability by combining a flexible spiral foil over which is a tin
plated copper braid which can be formed. This create a half-way situation, but with added
benefits of lower costs, improved performance and enhanced shielding. FPA Cables are available
on short lead-times with custom
...
 Anatech Electronics, a manufacturer of RF and microwave
filters, has published its April newsletter. As always, it includes both company news and
some tidbits about relevant industry happenings. In it, Sam Benzacar discusses, among other
topics, the challenge the Department of Defense will have with commercial services looking
to operate in the millimeter-wave bands for 5G, where military satellite and radars now operate
without significant threat of interference. He also mentions research in progress that allows
Wi-Fi to generate 3D tracking maps ...
 The new
IsoLOG 3D Mobile, Aaronia's latest development, is an ultra-light and small isotropic
antenna which is compatible to any spectrum analyzer. It is directly ready for use and is
a perfect plug and play solution for 3D measurements in limited time frames. The antenna requires
no software installation, no power connection and no hardware changes. It is connectable via
the N (male) connector to any analyzer or oscilloscope. Each IsoLOG 3D Mobile includes an
internal, rechargeable battery, offering a run-time of 6 hours, and a switchable low ...
 Microwave Journal has released a redesigned web site on ePublishing's
latest responsive platform for the best viewing experience on all types of devices and screen
sizes. The ePublishing platform is a SEO-friendly, taxonomy-driven web site that automatically
presents related content, community, commerce, advertising and special offers. The new Microwave
Journal home page is more image-driven providing a more visual experience for the user and
features embedded video, featured stories, white papers, current issue, buyer's guide ...
 Triad RF Systems introduces the
TTRM1019 broadband bi-directional low SWAP amplifier utilizing GaN devices,
making it well suited for EW / SIGINT applications. Its extremely fast switching speed and
high linearity also make the TTRM1019 an ideal solution for JTRS applications. This class
AB GaN module is designed for both military and commercial applications. It is capable of
supporting any signal type and modulation format, including but not limited to 3-4G telecom,
WLAN, OFDM, DVB, and CW/AM/FM ...
 Innovative Power Products, Inc., is proud to introduce
one of its newest broadband Dual Directional Couplers, Model
IPP-3206, a 200 watt coupler covering 20-520 MHz., in a very small 1.16" X 1.76" package
with SMA connectors. Insertion loss is <0.40 dB, main line VSWR is <1.25:1, coupled
flatness is +/-0.60 dB and directivity is greater than 20 dB ...
 The latest release of the
Modelithics COMPLETE Library™
for NI AWR Design Environment™, version 17.1, is now available, containing 44 new models
and introducing several new model features. New advanced scalable simulation models for RF
and microwave components from twenty (20) different vendors have been added to the version
17.1 release, including Microwave Global Models™ for capacitors from ATC, AVX, IPDiA (now
part of Murata), Johanson Technology, KEMET, Murata, ST Microelectronics, and Taiyo Yuden.
New inductor models are ...
 Saelig Company announces the availability of the
Spectran HF-80200 V5
RSA rack-mounted real-time 9 kHz-20 GHz Spectrum Analyzer that can capture even
intermittent signal transmissions. Most spectrum analyzers take time to scan through the frequency
range and can miss sporadic signals. But the Spectran HF-80200 V5 RSA has been designed with
a remarkable scanning speed and recording time: the analyzer scans from 9 kHz to 20 GHz
in less than 20 ms, so that even erratic transmissions or interference can be captured ...
 Copper Mountain Technologies has made available a whitepaper
titled
How to Test an RF Coaxial Cable using a VNA. "RF coaxial cables are high
precision test assemblies, which along with a calibration kit, adapters and a torque wrench
ensure the integrity of the measurements taken by test equipment such as a Vector Network
Analyzer. An ideal cable transfers maximum RF energy while incurring as little loss as possible.
To choose the best cable for a test solution, one has to consider several factors such as:
operating frequency ..."
 Skyworks has launched its new ultra-low loss DPDT switch,
the SKY13698-694LF, which is designed for smartphones, data cards, and MiFi®
hotspots. This device delivers the lowest insertion loss, high isolation antenna swap DPDT
switch currently available on the market. With industry-leading insertion loss across all
cellular bands, the switch maintains isolation >30 dB at 3.8 GHz, preventing
signal leakage and mitigating Rx desense issues. Its wide frequency range of 0.4 to 5.9 GHz
makes it the first cellular antenna swap device to support ...
 "Pasternack, a leading provider of RF, microwave and
millimeter wave products, has released 18 new
4.3-10 connectors and adapters with maximum operating frequency of 6 GHz
and VSWR as low as 1.08:1. Typical applications include custom cable assemblies, feeder cables,
mobile communications systems, base stations, distributed antenna systems (DAS) and small
cells. Pasternack's new 4.3-10 connectors and adapters feature low coupling torque and low-PIM
performance ..."
 ConductRF's skill in the manufacturing of Phase Matched
RF Cable Solutions is second to none. We have phase matched a diverse array of solutions from Low Frequency RG and LMR
Cables to more premium exotic cables up to 70 GHz. With a broad base of standard connectors
and cables in stock, we turn solutions around fast. Phase Matched cables are required in many
applications and for various reasons. Common application include Phase Arrayed Radar &
Broadcasting systems to allow directional focus, but ...
 Anatech Electronics offers the industry's largest portfolio of high-performance
standard and customized RF and microwave filters and filter-related products for military,
commercial, aerospace and defense, and industrial applications up to 40 GHz. Anatech
has introduced 3 new products for your convenience: a connectorized 1.300-1.530 GHz circulator,
a 10.7 MHz crystal filter, and a 902-928 MHz ceramic bandpass Filter for the ISM band ...
 NI will sponsor an upcoming Microwave Journal technical
webinar on RF
and microwave filter design. Presented by Dr. Bob Froelich, an RF and microwave engineer
with 30 years of experience in designing circuits and systems for radar, radio astronomy and
wireless communications, the webinar introduces attendees to core filter concepts, parameters
and topologies. Topics covered will include low-pass filters with lumped elements, using filter
tables, transformation to band pass, the importance of Q, the impedance inverter concept and
coupled-resonator filters ...
 Model 2PSZ525 from Werbel Microwave is a low frequency
broadband splitter, covering
5-2,500 MHz in a continuous band. Werbel's own, hand-wound coils make it possible to
achieve such broadband performance. Typical SWR is 1.4:1, typical isolation 20 dB across
the band. Phase and amp balance is 5 degrees, 0.7 dB max across the entire band. Case
measures 1.8x1.5x0.9 inches. SMA or N female options available ...
 Newly available is Empower RF Systems latest brochure
describing the capabilities and features of the most advanced RF amplifier systems available
in the world. Topics include: Big Power Best in Class SWaP, Industry First Scalable Pulsed
Power, Software Definable – Future Proof - Reconfigurable, Interoperable – Multi Domain, Remote
Control, Monitoring, and Debug, Multi Function Building Block Modules. Empower RF Systems
is the technological leader in smart ...
 As wireless devices and systems spread across every
industry, spectrum analyzers serve as an essential RF test tool for characterizing signals
and making frequency measurements. Download Rohde & Schwarz's definitive guide to understanding
the technology behind spectrum analyzer measurements. In this primer you will learn about:
Basics of Spectrum Analysis: Time and frequency domains, FFT analyzers,
analyzers using the heterodyne principle, settings for using a spectrum ...
 Saelig Company announces that the Pico Technology
PicoScope 9300
family of sampling oscilloscopes has been expanded with two new 25 GHz models - the PicoScope
9301-25 and 9341-25 models. These USB-controlled sampling oscilloscopes, designed for working
with repetitive signals, are a low-cost alternative to extremely expensive high-end GHz benchtop
scopes. The PicoScope 9300 series offers affordable high-integrity options for viewing and
measuring RF and microwave signals, signal paths, and RF networks. These high-speed sampling
oscilloscopes ...
 Cobham Antenna Systems, a market-leading antenna manufacturer,
draws on its vast range of resources to provide antenna solutions for systems designed to
compromise the
unlawful use of drones. A selection of these antennas will be on display
on the Cobham Booth, #1631, at AUVSI's XPONENTIAL 2017, 8-11 May, Dallas, USA. The range consists
of four main types of antenna which can be combined or configured in arrays for a multitude
of scenarios. The antenna types are: Wideband Omni-Directional; Directional Helix, Directional
Flat ...
 "Skyworks Solutions today released a new white paper, '5G in Perspective - A Pragmatic Guide to What's Next,' providing the company's
insights into the quickly evolving fifth generation (5G) global telecommunications standard.
The paper examines the current state of LTE networks, discusses ways it could evolve to deliver
a 5G user experience, and identifies the tools and techniques required to support a 100x improvement
in data throughput. Current projections suggest 5G data rates will approach 10 times the fastest
4G speeds of today. Leveraging its technology ..."
 Pasternack has released six new
free-running reference oscillators that generate a highly stable and accurate
output frequency response with low phase noise and spurious performance levels, making them
ideal in phase locked loops, function generators, frequency synthesizers and receivers for
communication, radar, navigation, surveillance and test and measurement applications. These
free-running, fixed-tuned oscillators use a high-stability internal crystal reference as an
integral part of the phase-locked assembly with a buffered amplifier output stage for improved ...
 Copper Mountain Technologies ha published a white paper
titled
Testing & Matching PCB Antennas: Switches and Other Options. "Connecting
to an Antenna Under Test (AUT) integral to a Device (DUT) may involve some tradeoffs between
measurement accuracy, electrical considerations, and mechanical ruggedness. In this paper,
we describe some aspects of this connection with practical advice for such test and measurement
scenarios. A test port will usually be at a 50 ohm point. If the design includes a coax switch
for inspection and final test purposes, an antenna test sample can be produced ..."
 Here is a note on
multipaction. NuWaves Engineering, a veteran-owned small business
providing advanced radio frequency (RF) and microwave solutions, announced today that the
bandpass filter designed for the Global Positioning System's (GPS) L1 band as part of the
Air Force Research Lab's (AFRL) Technologically Advanced N-plexer for GPS III Operation (TANGO)
Small Business Innovative Research (SBIR) Phase II project has successfully completed
multipaction testing.
The results of the testing proved that NuWaves' TANGO design will raise the bar for space
qualified components. "NuWaves is extremely proud of our progress to help AFRL advance ...
 Anatech Electronics offers the industry's largest portfolio
of high-performance standard and customized
RF and microwave filters
and filter-related products for military, commercial, aerospace and defense, and industrial
applications up to 40 GHz. Anatech has introduced 3 new products for your convenience:
a surface mount 12 MHz LC lowpass filter, a 10-900 MHz LC multiplexer , and a 2,412 MHz
WiFi cavity bandpass filter for outdoors ...
 Oscilloscopes, Spectrum Analyzers, Power Supplies, Signal
Generators, VNAs and more. Their use is as broad and diverse as the devices developed with
them. Numerous documents exist about what they are and which ones are 'the best'.
RF & Bench Essentials Reference Guide takes a step back and covers
the Essentials of RF and bench instrumentation including vertical resolution, sample rate
and memory depth. What is phase noise, resolution bandwidth or demodulation? Why should I
care about frequency setting time or ...
 Southwest Antennas, an industry leader in innovative
rugged antenna products, has released a new line of
omnidirectional antenna solutions designed specifically for existing and upcoming JTRS
military radio waveform standards that utilize the UHF, L, and S Bands, such as the Wideband
Networking Waveform (WNW) and Soldier Radio Waveform (SRW). Designed for use on handheld or
manpack radio systems, these antennas are focused on the band-specific needs of current warfighters
and are fully compatible with deployed radio units currently in use, in addition ..."
 Microwave engineers at RCL Microwave have executed
their first successful test and dielectric
measurement of a thin, flexible 200 micron thick glass material using novel measurement
fixtures and methods capable of broadband dielectric material characterization. The test was
performed and successfully completed using unique broadband measurement fixtures and the phase
difference method, which provides 10,000 data points from 1 MHz to 32 GHz. A 32 GHz
broadband test fixture has been combined with the Phase Difference Dielectric Characterization
Method to generate data across the entire frequency spectrum of interest ...
 Saelig Company has introduced the
Siglent SDM3065X - an
economical 6½ digit dual-display digital multimeter that is suited to high-precision, multifunction,
and automation measurement applications. It combines basic high-accuracy measurement functions,
with multiple math and display choices, and special features including histogram, trend chart,
bar chart, statistics, hold measurement, dBm, etc. The SDM3065X multimeter's front panel features
a 4.3" (480 x 272) high resolution color TFT-LCD display ...
 ConductRF introduces custom Multi-Port RF Solutions
using the Mil
D38999 Standards for applications across both military and commercial markets from DC
to 60 GHz. The D38999 standards provide a huge commonly available Multi-Port configuration
range which ConductRF uses to enhance with both Mil Standard and precision RF solutions. With
significant high frequency capabilities and its state of the art phase matching techniques,
ConductRF provides support that includes state of the art phase ...
 Planar Monolithic Industries (PMI) recently introduced
three new products in their extensive line of RF and microwave components. One is the
LNA-35-500M2D5G-0D6-25-12-SFF
35 dB low noise amplifier (LNA) covering 0.5 to 2.5 GHz. Another is a
DTA-14G40G-32-CD-2, 32 dB 10-bit programmable attenuator (DTA) for
frequency range of 14.0 to 40.0 GHz, and another is a 2-18 GHz 8-Bit, vector phase shifter
(VPS) ...
 The TTRM1008D GaAs amplifier operates at a frequency range of 4400 MHz to
5000 MHz and has a power output of 25 Watts, while still maintaining a compact form factor
of 5.63 x 6.13 x 0.69 inches. This unit also features internal protection against over/under
voltage and excessive temperature conditions, which coupled with its rugged construction,
ensure fault-free operation in even the most extreme environments. RF Systems Ships Dual Channel
C-Band ...
 Copper Mountain Technologies has published a whitepaper
titled, "What Makes a Good VNA?" CMT manufactures Vector Network Analyzers with
a USB interface. "Everyone knows that a good VNA should have both excellent hardware performance
and an easy to use software interface with useful post-processing capabilities. But there
are numerous VNAs in the market with different performance levels; some of them are economy
grade, and others are truly laboratory test grade. So what ..."
 Saelig Company has introduced the
Siglent SDS1202X-E 200MHz Digital Oscilloscope with improved Super Phosphor
Technology at a remarkably affordable price. With a real-time sampling rate of 1 GSa/s,
this new 200 MHz scope features waveform capture rates of up to 100,000 wfms/s in
normal mode and 400,000 wfms/s in sequence mode. The SDS1202X-E has a waveform record
memory of up to 14 Mpoints, and a 256-level color and intensity grading and color temperature
display. Together, these technologies have been collectively dubbed by the manufacturer ...
Anatech Electronics, a manufacturer of RF and microwave
filters, has published its April newsletter. As always, it includes both company news and
some tidbits about relevant industry happenings. In it, Sam Benzacar discusses, among other
topics, the court battle battle between AT&T and Rivada Mercury Networks regarding the
National Public Safety Broadband Network administered by FirstNet, build-out of IoT services,
and Google fiber. Anatech's business is to make certain that system and circuit designers
have capable filters available to assure successful ...
 The
TTRM1090 GaAs amplifier operates at a frequency range of 5700 MHz to 5900
MHz and has a power output of 25 Watts, while still maintaining a compact form factor of 5.3
x 3.25 x 0.57 inches. This unit also features internal protection against over/under voltage
and excessive temperature conditions, which coupled with its rugged construction, ensure fault-free
operation in even the most extreme environments. This class A GaAs module is designed for
both military and commercial applications. It is capable of supporting any ...
 As EW warfighting requirements continue to evolve in
their complexity and interdependency, it is clear that future EW systems must work collaboratively
with other air, ground, surface space and cyberspace systems. The need for multi-purpose,
multimode, flexible software defined EW systems is being clearly and widely communicated by
the DOD EW community.
Empower RF has developed the world's first software definable high power
RF amplifiers, an essential element for adaptable multi-mode EW systems. Come visit us to
learn more at the Point Mugu Electronic Warfare ...
 "Keysight experts will be at
WAMICON 2017 (April 24–25), an annual IEEE Wireless and Microwave Conference,
to discuss everything from circuit-level modeling to system verification for general RF, microwave,
millimeter wave for 4G, emerging 5G communications, and aerospace & defense. Keysight
also will be demonstrating the latest ADS 2016, EMPro and SystemVue software, as well as a
range of RF and microwave tools that include the ENA network analyzer, MXG X-Series RF vector
signal generator and MXA multi-touch signal analyzer ...
 "The 'Porcupine' is out, and it's making its debut
in all its shiny grandeur. Nicknamed 'Porcupine' within AT&T, a new millimeter-wave channel sounder was
introduced this week as a first-of-its-kind device. Looking a bit like something that might
be walking and talking in a Star Wars movie, the sounder was developed with the help of National
Instruments (NI) to capture how wireless signals are affected in a given environment. It can
be used to measure how signals reflect off of, or are blocked by, objects like trees ..."
 "Pasternack, a leading provider of RF, microwave and
millimeter wave products, has released four new
1.0 mm flexible VNA test cables that are designed to deliver precision
testing results for Vector Network Analyzer (VNA) testing, semiconductor probe testing, automotive
radar testing and military radar testing. They are ideal for applications such as test benches,
radar, microwave radio and millimeter wave radio. Pasternack's four new high-performance,
flexible VNA test cables operate at up to 110 GHz and deliver precise results for testing ..."
 On Tuesday, April 18, NI/AWR will sponsor a Microwave
Journal RF / microwave training webinar titled, "Introduction
to Radar." Presented by Scott Bullock, noted researcher and developer of radar simulators
and spread spectrum receivers, the webinar covers radar detection and ranging, pulse versus
continuous wave applications, radar modulation, radar path budget (basic radar equation),
radar range equation, range ambiguity and mitigation, maximum and minimum detectable range
and plan position indicator (PPI) and A-scope ...
|
