|
April 5th, 2021 - Vista, California -
Axiom Test Equipment,
an electronic test equipment rental and sales company, as published a new blog post
that informs people about the importance of conducting EMC/EMI tests. This is important
If you are looking to make measurements that test if an electronic design can operate
effectively when near other electronic devices and not cause electromagnetic interference
(EMI) to them. In addition, making smaller electronic products possible can be done
by achieving electromagnetic compatibility (EMC) within the operating environment.
Learn more about the variety of practical test equipment that has been developed
to perform the many measurements needed for efficient EMC/EMI testing.
EMC/EMI compliance and pre-compliance testing involves four
different types of measurements: radiated immunity, radiated emissions, conducted
immunity, and conducted emissions. EMC/EMI pre-compliance testing can be performed
within a reasonable budget, with a wideband signal analyzer, test signal source,
power amplifier to boost radiated test levels according to the requirements of the
applicable EMC/EMI standard, and test antennas and near-field probes.
Learn more about the importance of EMC/EMI tests, as well
as the different equipment you would need by reading the full blog post on Axiom's
Website.
https://www.axiomtest.com/blog/Make-Safer-Products-with-Practical-EMC-Testing/
Make Safer Products with Practical
EMC Testing
Electronic circuits and products are being made smaller as users seek more mobility
and portability. Whether those users are consumers, warehouse workers, or military
teams, electronic devices such as cell phones and even medical alert devices are
being designed to fit in smaller packages. Making smaller electronic products possible
is made possible by achieving electromagnetic compatibility (EMC) within the operating
environment - making measurements that tell whether an electronic design can operate
effectively when near other electronic devices and not cause electromagnetic interference
(EMI) for other electronic devices. Fortunately, a variety of practical test equipment
has been developed to perform the many measurements needed for efficient EMC/EMI
testing.
Different EMC and EMI regulations around the world set limits on acceptable amounts
of EM radiation from an electronic device, to prevent interference from the device,
but to also ensure the reliability and safety of the device. In the final stages
of an electronic product's development, designers may rely on an accredited test
lab that provides specialized test services to ensure that a product meets applicable
EMC/EMI regulations. This type of test lab has the equipment and experience to perform
all the EMC/EMI measurements according to different standards, such as the U.S.
military MIL-STD-461E/F requirements and EMC standards set by international organizations
such as the Comité International Special des Perturbations Radioelectriques (CISPR)
and the International Organization for Standardization (ISO).
Prior to full EMC compliance testing, EMC/EMI pre-compliance testing should be
ongoing during the design and development of a new electronic product...
Click here for the rest of the story...
Whatever your project requires testing of, rent or buy quality test equipment
from Axiom Test Equipment. For over 15 years Axiom Test Equipment has rented, sold,
repaired and accepted trade-in of test equipment to support your test & measurement
needs. If you would like help selecting any type of test equipment for your next
project, contact Axiom Test Equipment's sales department at
sales@axiomtest.com,
call 760-806-6600, or browse Axiom Test Equipment's inventory online at
www.axiomtest.com.
About Axiom Test Equipment
 Get Exactly What You Need. Rent - Buy
- Repair - Trade-In
Established in 2005, Axiom Test Equipment strives to continually improve itself
and offer the best value for its customers. We offer our customers several practical,
efficient and cost effective solutions for their business or projects' test equipment
needs. Whether you need to
rent & buy test equipment,
repair
test equipment, sell or trade equipment, we are committed to providing superior
customer service and high quality electronic test equipment.
At Axiom Test Equipment we provide several services. We
rent electronic test and measurement equipment. We also sell test
equipment. If you have a piece of malfunctioning or broken test equipment we also
have an in-house repair lab. For anyone seeking a way to offload their surplus or
obsolete equipment, we offer a trade-in program or we can buy the equipment from
you.
We stock a comprehensive inventory of equipment and can use our extensive network
to find you those hard to get items. We believe in getting equipment to you quickly
and at a competitive price.
Contacts
Axiom Test Equipment 2610 Commerce Way Vista, CA 92081
Phone: (760) 806-6600 Web: www.axiomtest.com
Posted April 6, 2021
|
