Press Release Archives:
2026 | 2025 |
2024 |
2023 |
2022
2021 |
2020 |
2019 |2018 | 2017 | 2016 |
2015
Content is copyright of company represented. Page format, custom text and
images are RF Cafe copyright - do not distribute. Note: Posting of press releases costs $100 each for non-advertisers.
5G Massive IoT System-in-Package
Specifications
-
Complete BB to RF solution in a single package:
-
Integrated baseband, transceiver, RF front end, RAM memory, and power management
-
8.8 x 10.8 x 0.95 mm BGA package, 0.5 mm pitch
-
Device weight: 229 mg
-
Compliant to 3GPP Rel-14 including VoLTE support, upgradable to 3GPP Rel-15
-
Optimized for half-duplex operation (HD-FDD) for LTE-M/NB-IoT
-
Pre-certified with major MNOs, FCC / IC/ TELEC / ACMA, and GCF / PTCRB
-
Global frequency band support
-
Positioning over LTE (PoLTE), a low-power, cloud-based solution for indoor/outdoor
positioning
-
Extremely low leakage internal PMU that enables operability for 10 years
-
Smart PA biasing scheme to maximize efficiencies during low-output power operation
Applications
 September 29, 2020 - Irvine, California - Through
our flagship
SKY66430-11, Skyworks is powering new devices in the rapidly emerging 5G Massive
Internet of Things (IoT) market. SKY66430-11 is the world's smallest, fully pre-certified
all-in-one system-in-package (SiP) incorporating cellular modem, transceiver, RF
front-end, memory and power management functionality, enabling LTE-M and NB-IoT
connected devices. This turnkey solution integrates Sequans' Monarch SoC platform
to support a wide range of low power, low data rate consumer and industrial IoT
applications including asset tracking, industrial monitoring, smart metering, wearables
and more.
Receive low-pass filters are integrated into the SiP along with the necessary
matching to yield a 50 ohm single-ended impedance for the antenna. The filters provide
a high level of rejection to out-of-band interferers, protecting the transceiver
from high blocking signal levels and guaranteeing 3GPP LTE blocking test conformance.
The RX low-pass filters are cascaded with the low throw count switch to establish
a lower insertion loss and noise figure than conventional LTE receiver designs.
The PA load-line is optimized for high efficiency while simultaneously meeting
3GPP ACLR and emissions mask specifications with LTE up to 6 RB. An integrated LPF
is implemented to reject the PA and transceiver harmonics while at the same time
minimizing any post PA loss for an optimized transmit current consumption. An integrated
LPF is implemented to reject the PA and transceiver harmonics while at the same
time minimizing any post PA loss for an optimized transmit current consumption.
About Skyworks
Skyworks Solutions, Inc. is empowering the wireless networking revolution. Our
highly innovative analog semiconductors are connecting people, places and things
spanning a number of new and previously unimagined applications within the aerospace,
automotive, broadband, cellular infrastructure, connected home, industrial, medical,
military, smartphone, tablet and wearable markets. Skyworks is a global company
with engineering, marketing, operations, sales and support facilities located throughout
Asia, Europe and North America and is a member of the S&P 500® and Nasdaq-100®
market indices (Nasdaq: SWKS).
Contact
Dena Pardi Skyworks Solutions, Inc. 5221 California Ave Irvine, CA
92617 Phone: 949-231-4207 E-Mail:
Dena.Pardi@skyworksinc.com
Posted September 29, 2020
|
