Planar Monolithic Industries (PMI) recently introduced four
new products in their extensive line of RF and microwave components. Included are
a 0.15 to 5.0 GHz Limiter, a 2.0 to 18.0 GHz SP2T Absorptive Switch , a
500 MHz to 40 GHz Low Noise Amplifier, and a 12 GHz Temperature Compensated
Dielectric Resonator Oscillator. Contact PMI today for more information.
PMI Model No. LM-150M5G-200CW-2KWPK-AGAL, 0.15 to 5.0 GHz, Limiter
 PMI Model
No. LM-150M5G-200CW-2KWPK-AGAL is a Limiter that operates over the 0.15 to 5.0
GHz frequency range. It has a maximum insertion loss of 2.0 dB and a maximum recovery
time of 100 ns. This model is outfitted with SMA female connectors in a housing
measuring 1.00" x 0.68" x 0.35".
PMI Model No. P2T-2G18G-55-T-512-SFF-LV-SP, 2.0 to 18.0 GHz, SP2T Absorptive
Switch
 PMI Model
No. P2T-2G18G-55-T-512-SFF-LV-SP is a Single Pole, Two Throw, Absorptive Switch
that operates over the 2.0 to 18.0 GHz frequency range. Maximum insertion loss of
3.0 dB and a minimum isolation of 55 dB. This model is outfitted with SMA female
connectors and in a housing measuring 1.00" x 1.00" x 0.50".
PEC-50-500M40G-20-12-292FF-BG, Low Noise Amplifier
 PMI
Model Number PEC-50-500M40G-20-12-292FF-BG is a 500 MHz to 40 GHz Low Noise
Amplifier that has a typical gain of 50 dB while maintaining a ±2.5 dB flatness.
This small 1.37" x 1.00" x 0.60" package has 2.92mm female connectors.
PMI Model No. TCDRO-12G-CD-1
 PMI Model No. TCDRO-12G-CD-1
is a Temperature Compensated Dielectric Resonator Oscillator with a center frequency
of 12.0 GHz. This model provides a minimum output power of +18 dBm with all spurs
held to -60 dBc and harmonics held to -25 dBc. The mechanical tuning frequency is
±10 MHz and the unit has a phase noise of -95 dBc/Hz The unit requires +15 VDC with
a maximum current draw of 200 mA and is supplied with SMA female connectors in a
housing that measures 1.80" x 1.00" x 0.50".
About Planar Monolithics Industries (PMI)
Planar Monolithics was founded basically to take advantage of the growing demand
in monolithic-based products using the hybrid MIC/MMIC technology innovations that
are mushrooming in a big way all over the world. High performance and reliable products
can be obtained by using this technology. Planar Monolithics will meet these requirements.
Planar Monolithics organization has been setup to design, develop, manufacture,
test, and market complex state-of-the-art hybrid RF/microwave and monolithic integrated
circuits (MIC/MMIC) and components, and hybrid MIC/MMIC supercomponents and subsystems.
Planar Monolithics provides its unique products for applications in space, military,
communications, telecommunications, commercial, and consumer electronics systems.
Contacts:
Sebastian Palacio Director of Sales & Marketing Principal Applications
Engineer Planar Monolithics Industries, Inc. 7311-F Grove Road Frederick,
Maryland 21704, USA CAGE Code: 05XQ0 Phone: (301) 662-5019 Cell:
(301) 455-9897 E-Mail:
spalacio@pmi-rf.com Website:
www.pmi-rf.com
Posted September 24, 2021
|
