1-port calibration - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews

-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

Yariv3G

Post subject: 1-port calibration

Posted: Mon Apr 03, 2006 4:13 am

Captain

Joined: Mon Apr 03, 2006 4:06 am
Posts: 8

Hi,
I am doing twice-1-port calibration for a 2-port device mounted on a fixture, due to the fact that I have noe real "Thrugh" even not on the commercial calibration structure. Is there a way to post process this data and get a proper 2-port calibration data that I can then embed into the Agilent ENA?
Thanks for any hints.
Yariv3G

_________________
R&S RF Application Engineer

Posted 11/12/2012

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while tying up your telephone line, and a lady's voice announced "You've Got Mail" when a new message arrived...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website: AirplanesAndRockets.com

My Daughter's Website: EquineKingdom

Amplifier Solutions Corporation (ASC) - RF Cafe

Tennode RF Connectors and Cables - RF Cafe