|
 |
consultant/contractor rates - RF Cafe Forums
|
Jake
Post subject: consultant/contractor rates Posted: Tue Dec 14,
2004 11:03 pm
There seem to be many more consulting/contract oppportunities
these days. I am looking for the rate that a consultant would charge
per hour and the rate a contractor would charge as well.
The only
site I cam across with typical rates was a navy site with IT work.
http://www.navy-itss.com/ITSS/Rates
Is there somewhere similar
for hardware engineering types (in the US)?
Top
anonyrama
Post subject: Posted: Fri Jan 07, 2005 4:59 am
Jake,
A recent
article on IEEE rates independant consulting between $100 and $125 on
average in the industry. That's if you are on your own.
Often times
if you are using a staffing agent he may charge $150 plus and he will
take his cut for brokering the job.
If you know how much you
would be making on that as full time employee with benefits a good rule
of thumb is to devide your yearly salary by 1000 to get your hourly
rate.
Posted 11/12/2012
|
|
|
|
|
