Qualcomm Onsite Interview for RF Systems SW & Tools Development Engineer - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews

-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

qqqq
Post subject: Qualcomm Onsite Interview Posted: Wed Mar 08, 2006 5:18 am

Lieutenant

Joined: Wed Mar 08, 2006 5:13 am
Posts: 2
Hi!!!

I have an onsite interview with QC for RF Systems SW & Tools Development Engineer position. It would be a great help if someone can tell me the kinds of questions to expect especially about C/C++

Posted 11/12/2012

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while tying up your telephone line, and a lady's voice announced "You've Got Mail" when a new message arrived...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website: AirplanesAndRockets.com

My Daughter's Website: EquineKingdom

LadyBug Technologies LB466A Power Monitor - RF Cafe

Anritsu MA25211A P25 Radio Auto Test & Alignment System - RF Cafe