microwave office 2001 - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews

-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

the french student
Post subject: microwave office 2001
Unread postPosted: Thu Apr 28, 2005 5:15 am

Hello, I 'd like some advice on microwave office 2001.
I realised some em structures, simulated them and now I need to print a mask in order to engrave my circuit but I don't find the option to do it.
When I print (or print view), it gives me an idea of my circuit's aspect but not with the right dimensions.
Does someone know how I can print it precisely because a soft like Corell draw isn't enought accurate and not adapted to my application.
Thanks

Steven

Posted 11/12/2012

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while tying up your telephone line, and a lady's voice announced "You've Got Mail" when a new message arrived...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website: AirplanesAndRockets.com

My Daughter's Website: EquineKingdom

Crane Aerospace & Electronics (RF & Microwave) - RF Cafe