Miteq MVA-1719 data? - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews

-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

sm7ovk
Post subject: Miteq MVA-1719 data? Posted: Sat Mar 14, 2009 12:29 pm

Lieutenant

Joined: Thu Jan 11, 2007 12:59 pm
Posts: 4
Hi guys,

I have a Miteq mixer MVA-1719 and can't any data for it. Somebody know anything about this item as frequencies at R, L and IF. LO power etc?

Regards
Jens

Top

Dexter
Post subject: Re: Miteq MVA-1719 data?Posted: Sat Apr 11, 2009 11:39 am

Captain

Joined: Thu May 04, 2006 7:37 am
Posts: 7
Hi Jens:

I have tried contacting Miteq for the info? They can probalby get you a datasheet.

http://www.miteq.com/general/contact.htm

Posted 11/12/2012

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while tying up your telephone line, and a lady's voice announced "You've Got Mail" when a new message arrived...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website: AirplanesAndRockets.com

My Daughter's Website: EquineKingdom

RF Electronic Stencils Symbols Visio Shapes Office

Innovative Power Products (IPP) Baluns & Transformers - RF Cafe