Electronics World articles Popular Electronics articles QST articles Radio & TV News articles Radio-Craft articles Radio-Electronics articles Short Wave Craft articles Wireless World articles Google Search of RF Cafe website Sitemap Electronics Equations Mathematics Equations Equations physics Manufacturers & distributors Engineer Jobs LinkedIn Crosswords Engineering Humor Kirt's Cogitations Engineering Event Calendar RF Engineering Quizzes USAF radar shop Notable Quotes App Notes Calculators Education Engineering Magazines Engineering magazine articles Engineering software Engineering smorgasbord RF Cafe Archives RF Cascade Workbook 2018 RF Stencils for Visio RF & EE Shapes for Word Advertising RF Cafe Homepage Sudoku puzzles Thank you for visiting RF Cafe!
everythingRF RF & Microwave Parts Database (h1) - RF Cafe

printed yagi array in HFSS - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

Karthik
 Post subject: printed yagi array in HFSS
Posted: Mon Dec 05, 2005 4:52 pm 
Hi,

I am trying to simulate a printed Yagi array (i.e., multiple Yagi antennas on a common substrate) using HFSS v9.2. I want to study the mutual coupling effects and the radiation pattern. I am not sure I can use the array synthesis tool because, in my structure, the Yagis are not oriented in the same direction. I tried specifying 1 port for each Yagi and thought of looking for the S21 parameter. But I get a value of -280dB, irrespective of the spacing (even when 2 Yagis overlap!!). Also, when I look at the radiation pattern, I get the pattern of a single antenna only, even when there are 2 Yagi's. The pattern that I obtain is that of the antenna for which I defined Port 1. The pattern of the other antenna (with port 2) doesnt seem to be calculated!!

Can any one help me with this??




Posted  11/12/2012
Anatech Electronics (RF Filters) - RF Cafe MPDevice microwave devices - RF Cafe
NorthEast RF Antenna Testing Services LadyBug Technologies LB5944A RF Power Sensor - RF Cafe
About RF Cafe
Kirt Blattenberger - RF Cafe Webmaster
Copyright: 1996 - 2024
Webmaster:
    Kirt Blattenberger,
    BSEE - KB3UON

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while typing up your telephone line, and a nice lady's voice announced "You've Got Mail" when a new message arrived...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website:  AirplanesAndRockets.com

spacer

Please Support RF Cafe by purchasing my  ridiculously low−priced products, all of which I created.

These Are Available for Free