Electronics World articles Popular Electronics articles QST articles Radio & TV News articles Radio-Craft articles Radio-Electronics articles Short Wave Craft articles Wireless World articles Google Search of RF Cafe website Sitemap Electronics Equations Mathematics Equations Equations physics Manufacturers & distributors Engineer Jobs LinkedIn Crosswords Engineering Humor Kirt's Cogitations Engineering Event Calendar RF Engineering Quizzes USAF radar shop Notable Quotes App Notes Calculators Education Engineering Magazines Engineering magazine articles Engineering software Engineering smorgasbord RF Cafe Archives RF Cascade Workbook 2018 RF Stencils for Visio RF & EE Shapes for Word Advertising RF Cafe Homepage Sudoku puzzles Thank you for visiting RF Cafe!
Exodus Advanced Communications

[color=red] need help simulate a microstrip array on a cone - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

bbvv
 Post subject: [color=red] need help simulate a microstrip array on a cone
Posted: Mon Sep 11, 2006 9:41 am 
 
Lieutenant

Joined: Mon Sep 11, 2006 6:07 am
Posts: 3
--------------------------------------------------------------------------------

Hy

I have to simulate a microstrip array on a cone shape .
I have already did it on a cylinder but i have problem constructing the array on a cone .

even if i enlarge the mesh density the eror remain.

there is another problem fixing the discrete port if i have several layers.

thanks in advance


[/img]


 
   
 
nubbage
 Post subject:
Posted: Tue Sep 12, 2006 6:25 am 
 
General
User avatar

Joined: Fri Feb 17, 2006 12:07 pm
Posts: 218
Location: London UK
Hi
What simulation software have you used?

If the stripline is to radiate, NEC should do the job OK


 
   
 
bbvv
 Post subject:
Posted: Tue Sep 12, 2006 1:02 pm 
 
Lieutenant

Joined: Mon Sep 11, 2006 6:07 am
Posts: 3
[quote="nubbage"]Hi
What simulation software have you used?




I used CST .

[/img]

http://images.elektroda.net/75_1157835876.JPG

http://images.elektroda.net/35_1157781790.JPG




Posted  11/12/2012
Res-Net Microwave - RF Cafe
About RF Cafe
Kirt Blattenberger - RF Cafe Webmaster
Copyright: 1996 - 2024
Webmaster:
    Kirt Blattenberger,
    BSEE - KB3UON

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while typing up your telephone line, and a nice lady's voice announced "You've Got Mail" when a new message arrived...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website:  AirplanesAndRockets.com

spacer

Please Support RF Cafe by purchasing my  ridiculously low−priced products, all of which I created.

These Are Available for Free