Simulation with Feko - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews

-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

alvin_lee

Post subject: Simulation with Feko

Posted: Fri Apr 01, 2005 10:33 am

Lieutenant

Joined: Fri Apr 01, 2005 10:29 am
Posts: 2

hi, I am required to simulate a microstrip dipole antenna on Feko. I have found a reliable design but am having problems with feko. is there anyone out there who is able to help me.

thanks

cheers
Alvin

Guest

Post subject:

Posted: Mon Apr 11, 2005 12:39 pm

Send email to feko_support@emssusa.com.

Posted 11/12/2012

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while tying up your telephone line, and a lady's voice announced "You've Got Mail" when a new message arrived...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website: AirplanesAndRockets.com

My Daughter's Website: EquineKingdom

Maury Microwave / Noisecom UFX7000B Noise Generator - RF Cafe

Innovative Power Products (IPP) RF Combiners / Dividers - RF Cafe

Innovative Power Products (IPP) 90 deg Hybrid Couplers - RF Cafe