Electronics World articles Popular Electronics articles QST articles Radio & TV News articles Radio-Craft articles Radio-Electronics articles Short Wave Craft articles Wireless World articles Google Search of RF Cafe website Sitemap Electronics Equations Mathematics Equations Equations physics Manufacturers & distributors Engineer Jobs LinkedIn Crosswords Engineering Humor Kirt's Cogitations Engineering Event Calendar RF Engineering Quizzes USAF radar shop Notable Quotes App Notes Calculators Education Engineering Magazines Engineering magazine articles Engineering software Engineering smorgasbord RF Cafe Archives RF Cascade Workbook 2018 RF Stencils for Visio RF & EE Shapes for Word Advertising RF Cafe Homepage Sudoku puzzles Thank you for visiting RF Cafe!
Exodus Advanced Communications

Need Help to design solid wide angle antenna for NLoS - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

andy59
 Post subject: Need Help to design solid wide angle antenna for NLoS
Posted: Mon May 21, 2012 3:30 am 
 
Lieutenant

Joined: Mon May 21, 2012 2:23 am
Posts: 1
Greetings All!

New around here! I have a outdoor 2x2 MIMO WiFi radio which has dual linear x-polarization antenna ports and need to design a 90* sector antenna in 2.4GHz and 5.8GHz for solid wide angle coverage for outdoor to indoor coverage in Non-LoS mode to achieve max wall penetration.

The TX output power of this radio is 22dBm.

My question is: What should be the optimum design for this Antenna which can generate max solid angle horizontal and vertical solid angle coverage. Should the 3db dual linear H/V pattern be about 90*/25*? My object is to cover maximum floors and provide good wall penetration with least amount of APs generating max array and diversity gain? PLEASE HELP!

God bless!




Posted  11/12/2012
Windfreak Technologies ConductRF Phased Matched RF Cables - RF Cafe
Windfreak Technologies Axiom Test Equipment - RF Cafe
About RF Cafe
Kirt Blattenberger - RF Cafe Webmaster
Copyright: 1996 - 2024
Webmaster:
    Kirt Blattenberger,
    BSEE - KB3UON

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while typing up your telephone line, and a nice lady's voice announced "You've Got Mail" when a new message arrived...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website:  AirplanesAndRockets.com

spacer

Please Support RF Cafe by purchasing my  ridiculously low−priced products, all of which I created.

These Are Available for Free