Electronics World articles Popular Electronics articles QST articles Radio & TV News articles Radio-Craft articles Radio-Electronics articles Short Wave Craft articles Wireless World articles Google Search of RF Cafe website Sitemap Electronics Equations Mathematics Equations Equations physics Manufacturers & distributors Engineer Jobs LinkedIn Crosswords Engineering Humor Kirt's Cogitations Engineering Event Calendar RF Engineering Quizzes USAF radar shop Notable Quotes App Notes Calculators Education Engineering Magazines Engineering magazine articles Engineering software Engineering smorgasbord RF Cafe Archives RF Cascade Workbook 2018 RF Stencils for Visio RF & EE Shapes for Word Advertising RF Cafe Homepage Sudoku puzzles Thank you for visiting RF Cafe!
Innovative Power Products Couplers

Antenna array simulation with matlab - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

Jenny
 Post subject: Antenna array simulation with matlab
Posted: Thu May 19, 2005 9:27 am 
 
Lieutenant

Joined: Thu May 19, 2005 9:17 am
Posts: 1
Hallo everyone, I am new for this antenna area. I am trying to use matlab to write programmes the beam pattern of a rectangular array and circular array, but the figures look like different from the books. :cry: I don't know why. For example, the 3-D figure with azithmus angle and polar angle, how change them into x-y plan? Who is good at pragramming with matlab and could you give me some codes about that?

Your advice will be very appreciated. :)

_________________
Jenny


 
   
 
Guest
 Post subject:
Posted: Mon May 23, 2005 3:26 am 
Yes, you're right, it really is difficult to search a website:



Quite at the end is a book which deals about '"antennas and Matlab".


 
  
 
oren
 Post subject:
Posted: Fri May 27, 2005 6:51 am 
Dear Jenny
why in the name of god you are using matlab to
design antennas.
try :cst microwave office
feko
ticra
ads
designer
qwed


 
  
 
nasrou
 Post subject: antenna array design
Posted: Tue Oct 04, 2005 6:55 am 
Hello !

Plz, do you have some exemples of antenna array design using ADS or matlab ?
thx

oren wrote:
Dear Jenny
why in the name of god you are using matlab to
design antennas.
try :cst microwave office
feko
ticra
ads
designer
qwed


 
  
 
ea
 Post subject:
Posted: Thu Oct 06, 2005 5:57 pm 
Try Makarov's book on antenna modeling using Matlab.






Posted  11/12/2012
Triad RF Systems
Exodus Advanced Communications - RF Cafe Res-Net Microwave - RF Cafe
About RF Cafe
Kirt Blattenberger - RF Cafe Webmaster
Copyright: 1996 - 2024
Webmaster:
    Kirt Blattenberger,
    BSEE - KB3UON

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while typing up your telephone line, and a nice lady's voice announced "You've Got Mail" when a new message arrived...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website:  AirplanesAndRockets.com

spacer

Please Support RF Cafe by purchasing my  ridiculously low−priced products, all of which I created.

These Are Available for Free