The UltraCMOS PE46120 Monolithic Phase and Amplitude Controller (MPAC) Delivers Best-in-Class RF Performance and Phase-Tuning Flexibility in the 1.8 to 2.2 GHz Frequency Range
PHOENIX – IMS 2015 – May 19, 2015 – In booth #2622
Peregrine Semiconductor Corp., founder of RF SOI (silicon on insulator) and pioneer of advanced RF solutions,
announces availability of the first product from the MPAC product family, the
Covering a frequency range of 1.8 to 2.2 GHz, the PE46120 integrates a 90-degree hybrid splitter, phase
shifters, digital step attenuator and a digital serial interface on a single die. Ideal for optimizing
dual-path dynamically load-modulated amplifier architectures such as Doherty power amplifiers, the monolithic
RF controller offers high linearity, high isolation, high power handling and maximum phase-tuning flexibility
compared to multi-chip, gallium arsenide-based solutions.
Peregrine Semiconductor's new UltraCMOS® PE46120
monolithic phase and amplitude controller (MPAC) delivers best-in-class RF performance and phase-tuning
flexibility in the 1.8 to 2.2 GHz frequency range.
"Doherty amplifiers remain strong as the power amplifier
architecture of choice for today's macrocell transceivers," says Herman Hugo, global head of marketing and
application engineering for RF power at Infineon Technologies. "As Infineon continues to develop leading- edge
products that are customized for optimal performance in the overall system, the Peregrine Semiconductor MPAC
product family offers RF performance and phase-tuning flexibility that will play a key role in Doherty
amplifier optimization, yield and uniformity."
MPAC Shines in Wireless Infrastructure Applications
The UltraCMOS PE46120 is designed for the LTE and LTE-A wireless-infrastructure transceiver market. This
product's 1.8 to 2.2 GHz range is ideally suited to enhance system performance, lower bill of material (BOM)
costs, increase reliability and provide maximum tuning flexibility for Doherty amplifier architectures found
in wireless infrastructure applications— such as macrocells, microcells and picocells.
When used for
Doherty amplifier optimization, the PE46120 offers performance advantages in power added efficiency, linearity
across the frequency range, Doherty bandwidth through better matching and increased effectiveness of the
digital pre-distortion (DPD) loop. This MPAC product reduces BOM costs by improving the overall yield of
expensive symmetric or asymmetric Doherty power amplifier assemblies. With uniformity and repeatability
between transceiver paths, the PE46120 increases system reliability and increases transceiver yield. The
monolithic controller can be used in either laterally diffused metal oxide semiconductor (LDMOS) or gallium
nitride (GaN) Doherty amplifiers and can be programmed remotely through the digital interface to accommodate
varying field requirements. This gives engineers the flexibility to adjust the phase and amplitude in
real-time for operational and environmental factors.
"Macrocell transceiver shipments have experienced
tremendous growth in the last two years," says Joe Madden, founder and principal analyst at Mobile Experts. "As Doherty solutions move into more broadband applications, improved uniformity and repeatability in phase
and amplitude adjustment will be critical."
MPAC Performance Far Exceeds Incumbent Technologies
the PE46120 is based on UltraCMOS technology, it delivers the intelligent integration pillars— reliability,
repeatability, flexibility, ease of use, configurability and enhanced system performance—that cannot be
matched by GaAs solutions. In addition, compared to competing solutions, this monolithic product offers:
- 20 dB more linearity (IIP3)
- 2.5 times the resolution at 2 times the range of the phase
- 10 dB higher port-to-port isolation
- 4 dB more of RF
input power (CW)
- Wide power-supply operation from 2.3 to 5.5 V
product family was introduced to provide RF system designers with the flexibility and required performance to
precisely control phase and amplitude in dual-path dynamically load-modulated amplifier architectures," says Kinana Hussain, Peregrine's director of marketing.
"Unlike competing solutions, the PE46120 integrates multiple components onto a single die—something GaAs
technologies could never achieve. This monolithic solution equates to a more reliable, repeatable and
easier-to-use solution for our customers."
Features, Packaging, Pricing and Availability
The UltraCMOS PE46120 covers a frequency range of 1.8 to 2.2 GHz. The monolithic RFIC integrates a 90-degree RF splitter, 5-bit digital phase shifters and a 4-bit digital
step attenuator along with a low-voltage, CMOS serial digital interface. It can cover a phase range of 87.2
degrees in 2.8-degree steps and an attenuation range of 7.5 dB in 0.5 dB steps. It delivers high linearity of
60 dBm IIP3 and extremely low power consumption of 0.35 mA. Uniquely, it provides high power handling of 35 dBm P0.1dB and high port-to-port isolation of 30 dB. Based on UltraCMOS silicon on sapphire technology, the
PE46120 offers the industry's most reliable and repeatable solution on the market. UltraCMOS technology also
enables superior ESD performance of 1 kV on all RF pins, an extended temperature range up to 105-degrees
Celsius and a wide power supply range from 2.3 to 5.5 V. Samples, evaluation kits and volume-production parts
are available now. Offered in a RoHS compliant, 32-lead 6 x 6 mm QFN, the PE46120 is $8.93 each for
1K-quantity orders, $7.24 each for 5K-quantity orders and $6.09 each for 25K-quantity orders.
About Peregrine Semiconductor
Peregrine Semiconductor Corporation, a Murata company, is the founder of RF silicon on insulator (SOI) and
is a leading fabless provider of high-performance, integrated RF solutions. Since 1988 Peregrine and its
founding team have been perfecting UltraCMOS® technology—a patented, advanced form of SOI—to deliver the
performance edge needed to solve the RF market's biggest challenges, such as linearity. With products that
deliver best-in-class performance and monolithic integration, Peregrine is the trusted choice for market
leaders in automotive, broadband, industrial, Internet of Things, mobile devices, smartphones, space,
test-and-measurement equipment and wireless infrastructure. A Murata company since December 2014, Peregrine
holds more than 180 filed and pending patents and has shipped over 2 billion UltraCMOS units. For more
information, visit http://www.psemi.com.
The Peregrine Semiconductor name, logo, and UltraCMOS are registered trademarks of Peregrine Semiconductor
Corporation in the U.S.A., and other countries. All other trademarks mentioned herein are the property
of their respective owners.
Peregrine Stocking Distributor
188 Martinvale Lane
San Jose, Ca. 95119
Posted July 5, 2015