|
 |
PMI Intros 26.5 to 32.5 GHz SPST, Absorptive, Solid-State Switch
|
|
January 15, 2013 Press Release
PMI Model No.
P1T-26D532D5-90-1212-292FF is an absorptive, single pole, single throw, solid-state switch
that operates over the frequency range of 26.5 to 32.5 GHz. This model provides a minimum
isolation of 90 dB and maintains low insertion loss of 5.0 dB maximum. The VSWR is
2.0:1 maximum into 50 ohms impedance and offers switching speeds of 25 nsec maximum
and 15 nsec typical. This switch is designed to handle input power levels up to +23 dBm
CW. The required DC voltage is +12V at 60 mA typical and -12 V at 40 mA typical.
Control of the switch is by single line TTL logic and the switch has 2.92 mm female RF
connectors. The package measures 2.0" x 1.5" x 0.75 and is gold plated.
http://www.pmi-rf.com/Products/Switches/P1T-26D532D5-90-1212-292FF.htm
 
[borders/inc-300x250.htm]Quick
Links:
Outline Drawing
Test Report
About Planar Monolithics Industries
Planar
Monolithics provides its unique products for applications in space, military, communications,
telecommunications, commercial, and consumer electronics systems. Planar Monolithics Industries,
Inc. has been set up to manufacture and market various MIC/MMIC (Microwave Integrated Circuits
and Monolithics Microwave Integrated Circuits) Components, Supercomponents, and Subsystems for
applications in Telecommunications, Terrestrial, Satellite, and Mobile-Radio Communications,
Defense (ECM, ECCM, ESM, Radars, and Electronic Warfare), Cable-TV, Navigation and Marine Electronics,
FAA/DOT-Avionics, Ground Based Systems, and Microwave Landing Systems.
Contact
Planar Monolithics Industries Inc.
7311-F
Grove Road
Frederick, Maryland 21704, USA
Phone: (301) 662-5019
FAX: (301)
662-1731
E-MAIL:
sales@pmi-rf.com
Posted 1/15/2013
|
|
|
|
