|
 |
PMI Intros 20 to 40 GHz Low Noise Amplifier
|
|
January 27, 2013 Press Release
PMI Model No.
PE2-28-20R040R0-5R5-18-12-SFF is a 20 GHz to 40 GHz low noise amplifier that typically
provides 28dB of gain. The gain flatness is ±2.5 dB maximum and ±1.5 dB typical with
a noise figure is 5.5 dB typical. This amplifier provides a minimum OP1dB of +15 dBm
minimum. The VSWR is 2.3:1 into 50 ohms impedance and operates on a single DC supply of
+12 to +15 volts with 350 mA nominal current consumption. This unit is supplied with
field removable 2.92 mm female connectors and in our standard PE2 housing that measures
1.08" x 0.71" x 0.29".
 
Datasheet:
http://www.pmi-rf.com/Products/amplifiers/PE2-28-20R040R0-5R5-18-12-SFF.htm
[borders/inc-300x250.htm]Quick
Links:
Product Feature
Test Report
About Planar Monolithics Industries
Planar
Monolithics provides its unique products for applications in space, military, communications,
telecommunications, commercial, and consumer electronics systems. Planar Monolithics Industries,
Inc. has been set up to manufacture and market various MIC/MMIC (Microwave Integrated Circuits
and Monolithics Microwave Integrated Circuits) Components, Supercomponents, and Subsystems for
applications in Telecommunications, Terrestrial, Satellite, and Mobile-Radio Communications,
Defense (ECM, ECCM, ESM, Radars, and Electronic Warfare), Cable-TV, Navigation and Marine Electronics,
FAA/DOT-Avionics, Ground Based Systems, and Microwave Landing Systems.
Contact
Planar Monolithics Industries Inc.
7311-F
Grove Road
Frederick, Maryland 21704, USA
Phone: (301) 662-5019
FAX: (301)
662-1731
E-MAIL:
sales@pmi-rf.com
Posted / /2013
|
|
|
|
|
