 |
PMI Intros 100 MHz to 2 GHz SP4T Absorptive Switch |
|
June 17, 2013 Press Release PMI Model No. P4T-100M2G-50-T-SFF-IN is an absorptive, single pole, four throw solid-state switch that operates over the 100 MHz to 2.0 GHz frequency range. The insertion loss is less than 3dB and offers port to port isolation of over 50 dB. The switching speed is 25 nsec maximum and the rise and fall times are less than 10 nsec. The control is via four independent TTL lines with Logic "0" being the low-loss state and Logic "1" being the isolation state. This switch operates on ±5 VDC and is supplied with SMA female connectors. The compact package measures only 1.0" x 1.2" x 0.24"   http://www.pmi-rf.com/Products/Switches/P4T-100M2G-50-T-SFF-IN.htm [borders/inc-300x250.htm]Quick Links: Outline Drawing Test Report About Planar Monolithics Industries Planar Monolithics provides its unique products for applications in space, military, communications, telecommunications, commercial, and consumer electronics systems. Planar Monolithics Industries, Inc. has been set up to manufacture and market various MIC/MMIC (Microwave Integrated Circuits and Monolithics Microwave Integrated Circuits) Components, Supercomponents, and Subsystems for applications in Telecommunications, Terrestrial, Satellite, and Mobile-Radio Communications, Defense (ECM, ECCM, ESM, Radars, and Electronic Warfare), Cable-TV, Navigation and Marine Electronics, FAA/DOT-Avionics, Ground Based Systems, and Microwave Landing Systems. Contact Planar Monolithics Industries Inc. 7311-F Grove Road Frederick, Maryland 21704, USA Phone: (301) 662-5019 FAX: (301) 662-1731 E-MAIL: sales@pmi-rf.com Posted 6/17/2013 |
 |
  |
  |
|
Please Support RF Cafe by purchasing my ridiculously low−priced products, all of which I created.
These Are Available for Free |
|
|
About RF Cafe
Copyright: 1996 - 2024 Web BSEE - KB3UON RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while tying up your telephone line, and a nice lady's voice announced "You've Got Mail" when a new message arrived... All trademarks, copyrights, patents, and other rights of ownership to images
and text used on the RF Cafe website are hereby acknowl My Hobby Website: |
|
