White Paper - The FCC Certification Process: Going Wireless |
 Linx Technologies has published a white paper titled, "The FCC Certification Process: Going Wireless." Author Justin Hopper writes, "The FCC certification process for products with wireless features can be complicated and daunting. Increasingly, customers are expecting wireless features, yet many manufacturers hesitate because of the uncertainty of the certification process. This article discusses the FCC certification process for the United States and shows that it is not as bad as it may seem. Other countries have different processes and procedures, but that is beyond the scope of this article...<continued> " This article is one of the first entries in Linx's new Blog. [borders/inc-300x250.htm]About Linx Technologies Linx Technologies makes wireless simple by developing and manufacturing wireless products that are easy for engineers of all skill levels to use. The company’s RF modules, remote controls, antennas and connectors make it easy for engineers to integrate wireless features without the hassle and expense of engineering RF functionality from scratch. For customers who need help implementing Linx modules, Linx offers design services including board layout assistance, programming, certification advice and packaging design. For more complex RF solutions, Apex Wireless, a division of Linx Technologies, creates optimized designs with RF components and firmware selected for the customer’s application. Contact Info 159 Ort Lane Merlin, OR, US 97532 Phone: +1 800 736 6677 +1 541 471 6256 (outside U.S.) Fax: + 1 541 471 6251 www.linxtechnologies.com  Posted July 18, 2013 |
  |
  |
|
Please Support RF Cafe by purchasing my ridiculously low−priced products, all of which I created.
These Are Available for Free |
|
|
About RF Cafe
Copyright: 1996 - 2024 Web BSEE - KB3UON RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while tying up your telephone line, and a nice lady's voice announced "You've Got Mail" when a new message arrived... All trademarks, copyrights, patents, and other rights of ownership to images
and text used on the RF Cafe website are hereby acknowl My Hobby Website: |
|
