Sutron is looking for a talented RF engineer
to work in its R&D department. The position
will allow you to help design and test RF, analog
and digital circuitry for use in Sutron’s sensors
and communications products. If you have knowledge
and experience with UWB, radar, antenna, RF you'll
fit right in.
Applicants should have the
following experience:
• Successful designs of
low power RF circuitry including the transmitter,
receiver, amplifier from 5 GHz - 8GHz.
• Bench
testing, debugging and analysis of circuitry to
determine if design meets functional and performance
specifications.
• Strong working knowledge of
discrete components such as capacitors, inductors,
resistors, filters, chokes, PIN /Schottky diodes
etc and performance over wide temperature and frequency
ranges.
• Experience utilizing simulation software
such as Eagleware/Agilent, • • ADS, Matlab, EMDS,
PSpice, and EEsof or similar.
• BSEE or greater
with 5 or more years experience.
And we
won't complain if you have experience with:
• Board design and layout.
• UWB Radar circuitry.
• Antenna design.
• DSP
Citizenship
not required.
For more information on Sutron,
visit
http://www.sutron.com Please e-mail your
resume and qualifications to
jobs@sutron.com
