Power Divider at U band(40-60GHz) to feed antenna - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews

-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

shashi

Post subject: resistivity of patch antennas

Posted: Tue Jan 25, 2005 3:13 pm

hello all,

what is the typical resitivity of conductive material for printed antennas.
can you suggest any material where I can find some good notes about resistivity dependence on patch antenna design.

thanks
shashi

victor

Post subject:

Posted: Thu Jan 27, 2005 4:19 am

u have a couple of application notes about patch antenna in microchip web site and good material will be FR4 pcb board.

Posted 11/12/2012

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while tying up your telephone line, and a lady's voice announced "You've Got Mail" when a new message arrived...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website: AirplanesAndRockets.com

My Daughter's Website: EquineKingdom

RF Electronic Stencils Symbols Visio Shapes Office

Windfreak Technologies Frequency Synthesizers - RF Cafe

Amplifier Solutions Corporation (ASC) - RF Cafe