3Gmetalworx
905-738-7973 | Toronto, Ontario, Canada
PCB-mounted
application-specific RF/EMI shielding enclosuresluding true
multi-cavity solutions.
Adamson
Consulting
720-496-4002 | Boulder, CO
Specialists in intellectual properties strategies, product
development, safety marks, and onsite electromagnetic measurements.
Advanced
Compliance Solutions
770-831-8048 | Buford,
GA
Provides complete EMC, product safety and environmental
testing of your products.
AFM Microelectronics
858-222-1199 | San
Diego, CA
RF/microwave multilayer capacitors, high power
high current multilayer, high temperature high voltage multilayer,
GBBL high K substrates for single layer capacitors, ultra
low fire dielectric powder. Sizes range from 0201 - 13560,
with operating voltages from 25 - 20k volts.
A.H.
Systems | 818-998-0223 | Chatsworth, CA
Manufacturer of individual calibrated EMC antenna kits,
log periodics, biconical, dipoles, loops, monopoles, horns,
preamplifiers, current probes and low-Loss cables that satisfy
many compliance testing standards.
Applied Physical
Electronics (APELC)
512-264-1804 | Austin,
TX
Marx generators having output pulses with ultrafast
rise times, moderate pulse widths, and amplitudes ranging
from tens of kV to several MV. RS-105 MIL-STD-461 E/F tester
for EMI/EMC. Testing antennas.
AR RF/Microwave
Instrumentation (formerly Amplifier Research)
215-723-8181 | Souderton, PA
RF power amplifiers, solid
state microwave amplifiers, TWT amplifiers, antennas, transient
generators, EMC test systems and software, field probes
and monitors, test accessories, and RF test system controllers.
Braco Compliance | +64 21 208 4303 | New Zealand
Australia and New Zealand C-Tick agent, NZ radiocommunications
agent and NZ medical device sponsor that enables suppliers
to meet the electromagnetic compatibility (EMC) regulatory
regimes of both Australia and New Zealand.
Compliance
Engineering Pty
+(613) 9763 3079 | Knoxfield
Australia
A single source for all of your EMC requirementsluding
EMC compliance testing, EMR surveys, consultancy, EMC equipment
sales, EMC test system integration, RF shielded enclosures,
and antennas.
Com-Power
Corporation | 714-587-9800 | Brea, CA
Manufactures
wide variety of EMI | EMC test equipment used for compliance
testing, precompliance testing or solving EMC problems.
Turnkey systems available. Active horn antennas, comb generators,
field probes, spectrum analyzers, more.
Corcom (now Tyco)
Power line filters, power
entry modules, signal line, facility, DC rated filters.
Cybershield | 888-725-5361 | Dallas/ TX
EMI/RFI shielding solutions using plating, vacuum metallization
and conductive paint. Dispensed conductive gaskets. 3D metal
patterns on plasticluding printed antennas.
East Coast Shielding
908-227-6857 | Hackettstown,
NJ
EMI shielding products. Serving the electronics and
commercial industries with high quality gaskets, gasket
materials, and die-cutting materials. Whether you need a
die cut, molded, or extruded material, we have the knowledge,
expertise, and materials to meet your every need.
EMC
Technology Florida RF Labs
800-544-5594
| Stuart, FL
Thin and thick film passive devices, attenuators,
resistors, terminations, equalizers.
EMC Test
Design | 508-292-1833 | Newton, MA
Offers
the complete line of Smart Fieldmeter® models
including three broadband electromagnetic field probes,
covering the frequency range 100 KHz-18 GHz, and one selective
GSM probe for GSM 900-1900 MHz range.
Empower
RF Systems | www.310-412-8100 | Inglewood,
CA
Founded in 1999, Empower RF Systems is a U.S.-based
company and global leader in power amplifier solutions that
are critical to defense, commercial, and industrial market
applications. Investments in both hardware and software
engineering are yielding next generation products with significant
size, weight, and interface functionality advantages over
legacy products in the market.
Global Advantage
International (now TÜV SÜD Canada Inc.)
905-883-3919 | Toronto, Ontario, Canada
Product EMC &
safety testing, complete product safety, regulatory compliance
and EMC solution provider.
Harwin
| 603-893-5376 | Salem, NH
Connectors, IC sockets, PCB
sockets, components & PCB accessories, application tooling.
Instruments for Industry (IFI)
631-467-8400
| Ronkonkoma, NY
Amplifier configurations such as tetrode
tubes, TWTs, klystrons, and solid state devices. Standard
horn antennas and TEM cells.
Kete Microwave Electronics
+86-595-22597735
| China
Ferrite RF isolator & circulators, high power
RF resistors & terminations, fixed & variable/step
attenuators, multilayer High-Q chip ceramic& feedthrough
capacitor (EMI filters), directional couplers, power dividers
/ combiners, 3dB hybrid couplers.
Kform | 703-450-4401 | Sterling, VA
RF shielded
server rack enclosure, waveguides, EMI/RFI shielding, goof
plugs, manufacturing and design services.
|
Koral Associates
+44 149 183 1682 | South
Oxfordshire, UK
Radio frequency heating and drying consultancy
service. Radio Frequency Interference (RFI) advice and solutions:
assistance with EN55011 (Europe), AS2064 (Australia) and
FCC Title 47 Part 18 (USA) compliance and measurement. Practical
shielding and filtering solutions for RFI reduction for
existing machines and new designs Health and Safety Advice
and Solutions including OSHA CFR 1910-97 (USA) Physical
Agents Directive requirements for Non Ionising Radiation
(Europe) Safe Interlocking, design of protective systems.
RF Awareness. Triode tube (Valve) calculations and replacement
advice. Expert witness service.
Laird
Technologies | 866-928 8181 | St. Louis, MO
Designer and manufacturer of antenna, electromagnetic interference
[EMI], telematics and thermal management solutions for the
telecommunications, data-communications, computer, general
electronics, network equipment, aerospace, defense, automotive
and medical equipment industries.
LBA Group
| 252-757-0279 | Greenville, NC
RF & wireless telecommunications
industry products & services including antennas, capacitors,
inductors, shielding systems, test equipment, testing and
technical services; RF Awareness & Antenna Co-Location
Training.
LCR Electronics
| 800-527-4362 | Norristown, PA
Specializes in the design,
development and manufacturing of custom and standard EMI
filters (RFI filters, EMC filters), EMC solutions, Motor
controls, Electronic controls, Subsystem enclosures and
back planes.
Leader
Tech | 813-855-6921 | Tampa, FL
Manufactures
electronic shielding products including gasketing that help
prevent electromagnetic or radio frequency interference
(EMI/RFI) on circuit board applications.
Mag
Layers USA | 800-427-4010 | Santa Ana, CA
LTCC components for RF | Bluetooth | WiFi | Zigbee applications
including: chip antennas, baluns, diplexers, band pass filters,
filters, inductors, chokes, coils, & ferrite beads.
ISO 140001 certified, complete support for design through
production. Free Samples - just call!
Nemko Canada
613 737 9680 | Ottawa, Ontario, Canada
TCB and CCB
offering wireless certification and also a test laboratory
covering wireless, EMI, safety, laser safety and telecom.
We offer one-stop-shop solutions for worldwide compliance
to standards such as FCC, RSS, CE Marking, UL, CSA, Korea,
and Taiwan. We also have experienced design engineers who
can help with product design and compliance strategies.
Orbel
| 610-829-5000 | Easton, PA
EMI/RFI shielding, board
level RF shielding, multi-cavity shields, finger stock,
chemical etched metal parts, metal stamping and electroplating
services.
P &
P Technology Ltd | +44 (0) 1376 550525 | UK
Manufacturer of EMI | RFI shielding gaskets, meshes and
vents.
Pepro
| 1-814-676-5688 | Oil City, PA
A faraday cage protection
system offering protection from lightning strikes, Electromagnetic
Pulse (EMP), Electromagnetic Interference (EMI), and Radio
Frequency Interference (RFI), lessens effects of Passive
Inter-Modulation (PIM) when equipment is installed/maintained
properly. Mobile radio sites designed for emergency temporary &
portable mobile communicationsident command posts, remote
base stations, Cell on Wheels (COWS), Site on Wheels (SOWS),
Tower on Wheels (TOWS), Mobile Tower Units (MTU), Cell site
On Wheels (cellular emergency services) and other unique
applications.
Precision Micro | +44 121 380 0100 | UK
EMI/RFI shielding solutions, from design to compliance.
Precision manufacturing technologies from Ion beam and electroforming
to photo etch and laser cutting.
RFI Corporation
| 631-231-6400 | Bayshore, NY
EMI/EMC/RFI filters, high
voltage magnetics & capacitors.
RFI
Industries | +61 3 8739 6700 | Australia
Designs, fabricates, installs and tests all types of
Radio Frequency shielded enclosures; offers sales and service
for a complete range of highly specialized EMI/EMC instruments,
antennas and accessories; offers a wide range of testing
capabilities and can handle items ranging from mobile phones
to large military vehicles.
RFTek
| 919-622-4088 | Raleigh, NC
Consulting and contracting
services for Electromagnetic Compatibility (EMC), Electrostatic
Discharge (ESD): design, test and compliance.
SAS
Industries | 631-727-1441 | Manorville, NY
Specializes in the manufacture of EMI shielding, waveguide,
connector, conductive, non-conductive, washer style, co-elastomer
gaskets, fluid sealing products, static and reciprocating
seals, and O-rings. Capabilities include die cutting, molding,
laser cutting, extruding, and water jet cut gaskets, along
with a wide variety of stocked sheet and roll goods.
Shielding Solutions Limited
01376 330033
| Braintree Essex UK
Design, manufacture & application
of components and materials for the control of electromagnetic
interference EMI and environmental sealing.
Stork
Garwood Laboratories (now Element Materials
Technology)
888-427-4111 | Pico Rivera, CA
Product
testing labs for EMI, EMC, reliability, vibration and environmental
testing, FCC approval and CE certification testing, CE and
CCC marking.
Wurth Electronics Midcom
605-886-4385
| Watertown, SD
+49 79 42 945 - 0 | Waldenburg, Germany
Custom and power magnetics, EMC components, common mode
chokes, capacitors, transformers, RF inductors, printed
circuits boards, terminal blocks, automotive magnetic components,
electronic displays, LEDs, control units, and keypads. Surface
mount and through-hole packages available. Free samples
of catalog items are available on request.
York
EMC Services
+44 (0) 1904 434440 | UK
EMC test equipment, consultancy and research, CPD &
training, EMC & LVD testing.
|
