|
Fairport, NY, USA: Saelig Company, Inc. (www.saelig.com)
has announced the TGP3100 series of true pulse generators that can generate precision pulses from 1 mHz up to 50 MHz with pulse width and delay resolutions of 100 psec. Single and dual channel models
are available, both featuring large graphic LCDs for simultaneous text and waveform information. The
TGP3100 Series are true pulse generators using all-digital techniques, but they can also act as high
performance noise generators and as function/arbitrary generators - making them truly universal waveform
generators. Unlike DDS function generators that also incorporate a pulse generator capability, the TGP3100
series has a dedicated pulse generator architecture enabling a much higher resolution of pulse width
and delay, and asynchronous operation with minimal jitter. Most available pulse generators have inferior
specifications due to their origins in the analog design world.
 The TGP3100 series features independently variable rise and fall
times that can be set from 5 nsec up to 800 seconds. PWM and PDM (pulse width and pulse delay modulation)
are incorporated. Unlike many other pulse generators, the TGP3100 series can perform linear and logarithmic
sweeps of all waveform types, as well as extensive internal/external modulation of all waveforms (e.g.
AM, FM, PM, SUM, FSK and BPSK etc.), double pulse, and user-defined pulse patterns. The frequency of
these waveforms can be set with up to 14 digits or one microHertz of resolution. PRBS (Pseudo-Random
Bit Sequence) sequence patterns can be created with lengths between 127 and 8,388,607 bits. Time delay
compensated external triggering allows asynchronous pulse generation with variable delay and minimal
jitter. An external width mode allows asynchronous pulse reconstruction. A high drive capability output
stage can drive 20 Vpk-pk into a 50 Ohm load. The fully variable output voltage can be load-impedance
compensated over a wide range with a minimum output level of 10 mVpk-pk. Sine waves are available up
to 50 MHz and fifteen other standard waveforms are provided. Arbitrary waveforms have 16-bit resolution
with an 800 Msample/sec rate.
With the TGP31x2 dual versions, either output can be triggered by the other channel to set up a complex
and versatile inter-channel trigger scheme without requiring external connections. The dual channel
model's two independent generators has facilities for coupled and tracking operation; e.g. if frequency
of one channel is changed, the frequency of the other channel can also change - either by a fixed ratio
or fixed offset. Amplitudes (and DC offsets) of the two channels can be coupled such that changing the
amplitude and offset on one channel changes the amplitude and offset of both channels. Outputs of the
two channels can be coupled such that switching the output on/off on one channel switches the output
on/off of both channels. When in tracking mode, both channels will behave as one channel. If inverse
tracking is selected, both channels still behave as one channel except that the output of channel 2
is inverted. The relative phase can be set from -360 degrees to +360 degrees with 0.1 degree resolution.
Pressing the 'align' key phase synchronizes the two channels with the specified phase offset.
A USB flash drive interface on the front panel can store results or setups, and the TGP3100 series
can be externally controlled via USB and LXI compliant LAN interfaces (GPIB optional). Waveform Manager
Plus for Windows software is included at no extra charge. TGP3121/ TGP3151 are the single-channel 25/50MHz
models, and TGP3122/TGP3152 are the dual-channel 25/50MHz models.
Made by Aim-TTi, a leading European test equipment manufacturer, the TGP3100 True Pulse Generators
are available now from Saelig Company, Inc. Fairport, NY. For detailed specifications, free technical
assistance, or additional information, please contact Saelig 1-888-772-3544, via email:
info@saelig.com, or visit
www.saelig.com.
About Saelig Company, Inc.
Founded in 1988 in Rochester, New York, Saelig is a North American distributor with a growing reputation
for finding and sourcing unique, easy-to-use control and instrumentation products and related active
components, for use in a variety of industries. Products lines are continuously added from sources across
the globe, and are offered at highly competitive prices, accompanied by full in-house technical support,
exceptional customer service, and fast delivery. For full details of available product lines, please
visit www.saelig.com.
Contact Info
Alan Lowne
President
Saelig Company, Inc.
71 Perinton Parkway
Fairport, NY 14450
USA Toll-Free: (888) 7-SAELIG
(888) 772-3544
Tel: (585) 385-1750
Email:
info@saelig.com
Web: www.saelig.com
Posted August 29, 2016
|
