Allics Technology | allicstech.com |
480-857-6447 | Chandler, AZ
IC design, product research and development services. Allics provides not only custom analog, complex mixed
signal, high performance & Precision, ultra low power, RF and microwave circuit design. But also offers
all aspects of complex & custom ASIC design services and System-On-Chip design services from concept
to silicon. Furthermore, Allics provides a variety of solutions and silicon proven Intellectual Property
(IP) for the most widely applications.
AnaRFICs | anarfics.com | 415-670-9541 | San Francisco, CA
Specializing in RFIC
and analog IC design services, we are a team of engineers with a wide variety of design skills ranging from
communications system design to analog and RF design at the chip and board level. We partner with several
digital design teams to offer a full and cost effective SOC turnkey solution in CMOS, BiCMOS or bipolar.
A complete analog IC solution can be developed with samples for as little as $30,000. (We also accept smaller
Australian Microwave Components (AusMW) | ausmw.com
| +61 414 445 915 | Alberton,
Collaborative design consulting group specialising in RF componentry (MMICs) with engineers
based in Australia, USA, UK, Japan, Hong Kong.
Cadence | cadence.com | 408-943-1234 | San Jose, CA
Digital IC design services.
Cascade Linear, Inc | cascadelinear.com | 206-632-6949
Design of custom mixed-signal
integrated circuits and high performance analog cells.
Convergence Devices Inc. | convergence-devices.com/index.html
416-580-5910 | Richmond
Hill, Ontario, Canada
Electronic systems design, schematic capture, PCB layout, and board manufacture.
Component engineering (BOM analysis and creation), quick turn PCB design and prototype, controlled impedance,
complex mixed-signal, low-signal, analog, RF, high speed digital, FPGA design and programming. Full turnkey
demo boards and reference designs - including boards, software. Signal integrity, EMI/EMC testing and FCC
compliance, RoHS, provide documentation.
Custom MMIC | custommmic.com | 978-467-4290 | Westford, MA
Custom MMIC Design Services (CMDS) provides
innovative solutions to today's tough microwave design challenges. We have over 25 years of combined experience
in designing state-of-the-art MMIC chips for millimeter wave, point-to-point radio, VSAT, WLAN, and cellular
systems as well as general microwave applications.
Desert Microtechnology | desertmicro.com | 480-515-0005 | Scottsdale, AZ
1994 Desert Microtechnology's team of dedicated, experienced engineers have been successfully developing
and producing custom and semi-custom integrated circuits for satisfied customers world wide. We have experience
in a wide range of technologies. If you need a custom analog or mixed-signal IC, or are having procurement
or performance difficulties with your present custom chip, we can help. Let's talk.
ELXYS Innovations S.A. | elxys.com | +302106108998 | Athens, Greece
Fabless semiconductor company providing analog, RF, and mixed-signal IC design
services and relative semiconductor intellectual property (IP) products for the most demanding wireless
applications. CMOS and SiGe BiCMOS processes at different technology nodes spanning from 1.2 um to 65 nm.
Evatronix | evatronix.pl | +48 33 499 59 00 | Bielsko Biala, Poland
for IP cores on demand including Front end ASIC/SoC, FPGA design, and verification.
e-vision | evisioninc.ch | +41-44-882 1707 | Zürich, Switzerland
have leading skills and hands-on experience in bringing sophisticated integrated circuits from the concept
to a mass product. This know-how is available to solve your problems and can be flexibly assigned to speed
up your projects. Consulting can be offered in the following areas: Custom ASIC design, Low cost volume
production of IC, MPW services.
IC Design Services, Inc | icdsn.com | 972-741-6010 | Dallas, TX
integrated circuit product development company. Our primary areas of expertise are power management systems,
pure analog circuit design, system modeling, and mixed signal integration techniques.
IC Design Consultants | icdesignconsultants.com
| 760-525-5308 | Carlsbad, CA
specialists in IC design of mixed signal circuits, including PPL, VCO, ADC, DAC, DDS, synthesizers, sigma-delta,
SONET and other analog high speed blocks. Over 40 years of combined experience designing mixed signal and
high-speed analog integrated circuits with state-of-the-art commercial technologies: Bicmos (SiGe), SOS,
CMOS and GaAs. Strong DSP background.
InfiniteChips, Inc | infinitechips.com | 450-550-7942 | Quebec Canada
high performance mixed-signal / RF / analog ICs, full support from concept to production, delivery of silicon
proven systems in state-of-the-art IC technologies.
KT Micro, Inc | ktmicro.com | 949 766-6744 | Rancho Santa Margarita, CA
in high-end analog/mixed-signal design & consulting services including IP service and licensing, full
custom design and integration of mixed-signal/analog macros, SOC total solution, mixed-signal IC design,
system integration, process selection, process migration, device modeling, testing, and failure & yield
analysis, mixed-signal PDK development and licensing.
Mask Design Limited | icmaskdesign.com | +353 (0) 61 330 900/ Limerick, Ireland
IC Mask Design is Ireland's first independently owned Integrated Circuit Physical Design Company. We
are breaking new ground in the semiconductor design industry, exploiting the trend towards outsourcing in
the semiconductor marketplace, as well as the demand within the industry for high quality Physical Design
Matricus, Inc | matricus.com | 972-221-1614 | Lewisville, TX
IC designs and IC design services to an extensive number of end-users, system’s houses & semiconductor
companies around the world.
Moortec Limited | Moortec.com | +44 (0)1752 693800 | Plymouth, England
services. We are specialists in high performance analog and mixed signal design such as PLLs, ADCs, DACs,
I/O cells and ESD structures. Moortec Limited also encompass a talented digital IC design and verification
team to allow complete in house development of ASICs for customers. Our designers are experienced in technologies
from 0.6um to 65nm and have a specialty in ultra low power design.