134 Rue du Roi appt6 Québec Canada G1K2W1 418-265-5681 mohamed.sehil@lyrtech.com |
Mohamed Sehil
|
Professional objective
| Senior RF designer. |
Experience
| January 2006 until now | Lyrtech R&D | Quebec |
1. Design and enhancement of RF PCB boards for a software defined radio product (DC-1GHz).
2. Design of RF module in use for GSM high bands (1.7-2.1GHz).
2. Knowledge of RF design trade-offs and design optimization techniques using different of RF simulators.
3. Understanding of modern RF measurements and techniques.
4. Interact closely with hardware & software designers to determine test requirements. Performing digital, analog and RF hardware verification and writing test reports. |
January 2004 until Dec 2006 | Ecole Polytechnique de Montreal | Montreal |
| Research Subject § Modeling and fabrication of an integrated inductor on silicon to produce an efficient inductive power transfer required to supply implantable devices such as visual implant. - Modeling and optimization of the integrated inductor were done using Matlab.
- Layout and extraction were done using Momentum ADS Electro-Magnetic simulations.
- ADS schematic is used to compare the Matlab model and Electro-magnetic simulation results.
|
November to December 2004 | Ecole Polytechnique de Montreal | Montreal |
| Project § Design of a wide band amplifier using a BJT. - Design and simulations of the wide band amplifier (stability, gain circles and matching network) using ADS schematics.
- Layout using momentum (Agilent design systems).
|
September to December 2003 | Ecole Polytechnique de Montreal | Montreal |
Project § Design of an ultrasound transmitter using Dalsa 0.8μm high voltage technology. - Design and simulations of a DC-DC converter to increase voltage from 9V to 200V, a level-up shifter and piezoelectric transducer using Cadence.
- Layout and extraction of the ultrasound transmitter in Dalsa 0.8μm high voltage technology.
|
Formation
| September 2005 | Ecole Polytechnique de Montreal | Montreal |
| Master of Science (MSc) in Electrical Engineering § 3.25/4 |
| April 2003 | Université du Québec à Trois-Rivières | Trois-Rivières |
| Bachelor of Science in Electrical Engineering § 3.57/4.3 |
| June 2000 | Institut National des Sciences appliquées et de technologie | Tunis |
| Bachelor in Industrial Instrumentation |
Languages
| § English used as a working language on a daily basis. § French as a second language. |
Skills
| § Cadence and Agilent Design System (ADS) schematic and layout editors. § Programming in C/C++, Matlab and VHDL. § Skilled in communicating with people of differing levels of authority and backgrounds. § Easy-going, hardworking, dynamic and responsible. |
References
| Ahmed Ouameur Messaoud Lyrtech 418- 877-4644 (2310) |
| Mohamed Sawan École Polytechnique de Montréal 514-340-4711 (5943) |
| Agbossou Kodjo Université du Québec a Trois-Rivières 819-376-5011 (3911) |