| Position: RF Engineer Characteristics of this employee: This person has to be hardworking, intelligent, enthusiastic, motivated, patient, a good communicator, and highly organized. The ability to take complex tasks and break them down into manageable chunks is a must. Job Functions/Required Experience: RF Design – must be able to work with an engineering team to design modular radio products and OEM radio solutions. Applications are primarily battery powered, and are very power-conscious. Experience with 433 MHz, 868 MHz, 900 MHz, and 2.4 GHz radio development is essential; knowledge of applicable FCC, ETSI, IC, and Anatel regulations are helpful. Both discrete and IC-based design experience required. RF Design Optimization – must be able to fine-tune matching circuits, troubleshoot performance problems, etc. Antenna Design – must be able to design effective antennas for embedded systems. Assist in customer product failure analysis – Very often, our customers will have design problems prohibiting them from reaching mass-production. We will assist them by analyzing their product and either correcting or suggesting corrections to their designs. A successful candidate will be able to analyze and evaluate a customer design and suggest changes to enhance the radio’s performance. PCB design and schematic capture, Protel DXP experience preferred Customer support – some direct interaction with customers will be required. Experience with RF simulation software such as Genesys Embedded programming in C, and Windows programming experience are pluses.
Education level: Bachelors degree in electronics/engineering with 8 or more years industry experience or equivalent. Salary: Competitive salary will be based on experience. Fulltime/Part time: Position will be full time. Where to Send: Send resume to rferes@radiotronix.com or
fax to (405) 794-7477 with “RF Engineer” on the cover page. |
