RF Cafe Software
About RF Cafe
1996 - 2022
BSEE - KB3UON
RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The Internet was still largely an unknown entity at the time and not much was available in the form of WYSIWYG ...
All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.
My Hobby Website:
Try Using SEARCH
to Find What You Need.
There are 1,000s of Pages Indexed on RF Cafe !
June 1935 Radio-Craft[Table of Contents]
People old and young enjoy waxing nostalgic about and learning some of the history of early electronics. Radio-Craft was published from 1929 through 1953. All copyrights are hereby acknowledged. See all articles from Radio-Craft.
Operating voltages for this receiver are measured as follows. Line voltage, 112 V antenna and ground disconnected; measurements taken to ground; G1 is control-grid, G2-screen-grid, G3-suppressor.grid. (The output of V5 is not given.) Alignment data: For I.F. adjustment, connect service oscillator to G1 of V1, and ground. Align C band at 15 megacycles (service oscillator connected to antenna and ground posts); align A band at 600 and 1,400 kc.
Posted June 9, 2016
Radio Service Data Sheets
These schematics, tuning instructions, and other data are reproduced from my collection of vintage radio and electronics magazines. As back in the era, similar schematic and service info was available for purchase from sources such as SAMS Photofacts, but these printings were a no-cost bonus for readers. There are 185 Radio Service Data Sheets as of April 12, 2017.