•−• ••−•  −•−• •− ••−• •
RF Cafe in Morse Code: Hear It

  

  

RF Connector Torque Specifications

 Please click here to visit the Connector City websitePlease click here to visit the GigaLane website.

 

 

 Click here to see connector usage chart.

 Click here to see drawings of connector types.

 Click here for the MIL-PRF-39012 specs.

 

ConnectorCoupling Torque 
N-cm/lb-in		Open-End
Wrench Size
Type DIN 7-163500/31027 & 32 mm
Type F (75 ohm)168/157/16
Type FD168/15 
7 mm (APC-7)135/123/4 in (19 mm)
Type N 50/75 ohm135/12
135/12		25/32 in (20 mm)
3/4 in (19 mm)
3.5 mm90/88 mm
2.4 mm90/88 mm
2.92 mm (K)90/88 mm
1.85 mm (V)90/85/16 in (8 mm)
SMA, OSM45/4 (economic)
100/9 (standard)
195/17 (hermetic)		5/16 in (8 mm)
5/16 in (8 mm)
 7 mm
SSMA70/60.25
SMC35/36 mm
TNC56/59/16 (15 mm)
1.0 mm45/46 mm

These values were originally pulled from Agilent's calibrated torque wrench page, but it has disappeared. Additional information gathered from other online sources such as the Huber+Suhner and Radiall websites. Torque values can vary considerably between vendors.  1 lb-in = 11.30 N-cm

SM Electronics sells calibrated torque wrenches.

Locations of visitors to this page

  Note: Numbers shown are NOT total page views; they are
            unique IP addresses for each 24-hour period (i.e.,
            unique visitors). Typical page view counts are at least
            twice the reported unique visitor number.

RF Cafe
Erie, PA
(814) 833-1967

A Disruptive Web Presence™
GPS Coordinates:
N 42°04.577', W 080°11.757'

Advertise on RF Cafe
 

Translate RF Cafe Into Your Native Language

Translate RF Cafe into your native language (or something closer to it)

Make RF Cafe Load Faster

RF Cafe pages loading more slowly with IE than when using Firefox or Netscape? Click here for the solution.