Homepage - RF Cafe
Webmaster: Kirt Blattenberger | KB3UON | Sitemap | ©1996-2014     Visit RF Cafe on
      Menu below is just a small sample of what is here!          Visit RF Cafe on Facebook Visit RF Cafe on Twitter Visit RF Cafe on LinkedIn
Custom Search
More than 10,000 searchable pages indexed.
•−•  ••−•    −•−•  •−  ••−•  •
RF Cafe Morse Code >Hear It<

FCC Part 15 Radio Frequency Devices
Section 15.202

The Federal Communications Commission (FCC) is the authority in the United States of America that creates and enforces the use of airwaves throughout the entire radio frequency spectrum. This group of documents contains the entirety of the FCC Part 15 regulations that concern unlicensed radio frequency devices. As with all government documents, this material is in the public domain and may be freely copied so long as the content is not changed. This copy is provided as a convenience for RF Cafe visitors. 

Click here for the Table of Contents.
[Code of Federal Regulations]
[Title 47, Volume 1]
[Revised as of October 1, 2008]
From the U.S. Government Printing Office via GPO Access
[CITE: 47CFR15.202]
[Page 802]
 
                       TITLE 47--TELECOMMUNICATION
 
              CHAPTER I--FEDERAL COMMUNICATIONS COMMISSION
 
PART 15_RADIO FREQUENCY DEVICES--Table of Contents
 
                     Subpart C_Intentional Radiators
 
Sec. 15.202  Certified operating frequency range.
 
    Client devices that operate in a master/client network may be 
certified if they have the capability of operating outside permissible 
part 15 frequency bands, provided they operate on only permissible part 
15 frequencies under the control of the master device with which they 
communicate. Master devices marketed within the United States must be 
limited to operation on permissible part 15 frequencies. Client devices 
that can also act as master devices must meet the requirements of a 
master device. For the purposes of this section, a master device is 
defined as a device operating in a mode in which it has the capability 
to transmit without receiving an enabling signal. In this mode it is 
able to select a channel and initiate a network by sending enabling 
signals to other devices. A network always has at least one device 
operating in master mode. A client device is defined as a device 
operating in a mode in which the transmissions of the device are under 
control of the master. A device in client mode is not able to initiate a 
network.
[70 FR 23040, May 4, 2005]



A Disruptive Web Presence

Custom Search
Over 10,000 pages indexed! (none duped or pirated)

Read About RF Cafe
Webmaster: Kirt Blattenberger
    KB3UON

RF Cafe Software

RF Cascade Workbook
RF Cascade Workbook is a very extensive system cascaded component Excel workbook that includes the standard Gain, NF, IP2, IP3, Psat calculations, input & output VSWR, noise BW, min/max tolerance, DC power cauculations, graphing of all RF parameters, and has a graphical block diagram tool. An extensive User's Guide is also included. - Only $35.
RF system analysis including
frequency conversion & filters

RF & EE Symbols Word
RF Stencils for Visio

Product & Service Directory
Personally Selected Manufacturers
RF Cafe T-Shirts & Mugs

RF Cafe Software

Calculator Workbook
RF Workbench
Smith Chart™ for Visio
Smith Chart™ for Excel
Your RF Cafe Progenitor & Webmaster
Click here to read about RF CafeKirt Blattenberger... single-handedly redefining what an
                                 engineering website should be.

View the YouTube RF Cafe Intro Video Carpe Diem! (Seize the Day!)

5CCG (5th MOB): My USAF radar shop

Airplanes and Rockets: My personal hobby website

Equine Kingdom: My daughter Sally's horse riding website