you remember seeing a company press release or new product announcement on the RF Cafe homepage but
now it is gone, try looking through the archives. Content is the copyright of the company represented,
but the page format is my copyright and cannot be distributed to other media outlets. Please submit
your content for consideration to firstname.lastname@example.org.
2015 | 2016
The Perfect Solution for 3D Measurements
May 17, 2017
- The new
IsoLOG 3D Mobile, Aaronia's latest development, is an ultra-light and small isotropic antenna which
is compatible to any spectrum analyzer. It is directly ready for use and is a perfect plug and play
solution for 3D measurements in limited time frames. The antenna requires no software installation,
no power connection and no hardware changes. It is connectable via the N (male) connector to any analyzer
Each IsoLOG 3D Mobile includes an internal, rechargeable battery, offering a run-time of 6 hours,
and a switchable low noise bypass preamplifier. The integrated amp allows measurements of very low-powered
signals. Thus, used in bypass mode, the antenna is still usable for high field-strengths. The control
of the antenna is done via USB or via manual antenna selection mode, requiring no USB connection.
- Worlds first 9 kHz to 6 GHz Handheld Isotropic Antenna
- Suitable for any Spectrum Analyzer
- High Gain and Low Noise
- Built-in Bypass Preamplifier
- Manual or Automatic Axis Switch
- Battery or DC Powered
- Incl. Control Software
- 10 years warranty
- Compatible with any Spectrum Analyzer brand
- Design: 3D (Isotropic)
- Frequency range: 9 kHz to 6 GHz
- Nominal impedance: 50 Ohm
- VSWR: <1:2,5 (typ.)
- Gain: up to 10 dBi
- RF connection: N (female) or others on request
- Dimensions (L/W/D): 340x75x75 mm
- Weight: 350 g
- Warranty: 10 years
Aaronia also integrated an ultra-fast adjustable "chopper" function. Using special, glitch free RF
switches this feature offers an automatic endless antenna rotation/selection with a switching duration
of up to 50 kHz. This feature transforms the IsoLOG 3D Mobile into a fully functional 3D antenna
without the need of any USB software control.
Shipped in a waterproof transport-case, accompanied with a pistol grip with tripod functionality,
the scope of delivery leaves nothing to be desire.
All Aaronia antennas are developed, individually produced and calibrated in Germany at the Aaronia
factory. This guarantees highest standards so that Aaronia can offer every customer a full 10 years
warranty for all EMC antennas.
About Aaronia AG
Aaronia AG is a manufacturing company of high end RF & MW equipment based in Germany.
Aaronia was founded in 2003 by Mr. Thorsten Chmielus and mainly produces Spectrum Analyzers, Generators,
Antennas and Shielding Materials. In 2004 Aaronia shipped its first spectrum analyzer.
In 2008 Aaronia presented a new generation of the SPECTRAN spectrum analyzer, the V4 series. It was
the first handheld RF analyzer to reach a sensitivity of -170dBm DANL - a world record.
In 2016 Aaronia released the SPECTRAN V5 series - the world's first and only handheld, real-time
spectrum analyzer. The frequency range for the V5 Series was extended from max. 9,4GHz to 20GHz.
Today's purpose of the enterprise is development, trade and sale of measuring equipment, technologies
and rights of low and high frequency measurement technique, robotics as well as screening/shielding
of RF and E-fields and fundamental research at the segment of communications and measurement engineering,
furthermore the construction of own circuitries and measuring methods in particular for the development
of extreme sensitive and precise high-frequency measurement devices.
Manuel Pinten (Sales Manager)
Birgit Hontheim (Public Relations)
Phone: +49 (0)6556-93033
Fax: +49 (0)6556-93034
Posted May 18, 2017