See How Modelithics Is Making Waves Lately |
Press Release Archives: 2024 | 2023 | 2022 | 2021 |2020 2019 | 2018 | 2017 | 2016 | 2015 2014 | 2013 | 2012 | 2011 | 2010 2009 | 2008 | 2007 | 2006 | 2005 Content is copyright of company represented. Page format, custom text and images are RF Cafe copyright - do not distribute.
See How Modelithics Is Making Waves Lately Tampa, Florida (October 18, 2022) – Modelithics, the industry leader in providing innovative and high-quality custom modeling and measurement services for RF, microwave and millimeter-wave electronic devices provides this update on the latest happenings with their products and industry partners. Modelithics® Releases the COMPLETE+3D Library™ v22.4 for Ansys® HFSS™ Included in this library are over 370 highly scalable Microwave Global Models™ for capacitor, inductor, and resistor families from many popular vendors. Also included is Modelithics' collection of over 500 3D electromagnetic (EM) geometry models for inductors, capacitors, filters, packages, and connectors. With both circuit and 3D EM models, the Modelithics COMPLETE+3D Library now includes over 30 vendors for more than 850 models representing over 25,000 individual components. Modelithics Offers New Attenuator and Resistor Models from Smiths Interconnect Modelithics is pleased to announce the release of several new models for components from Smiths Interconnect. The new models include a Microwave Global Model™ for the TSX Series of surface-mount attenuators and new substrate-independent models for the CTX Series (CTH0603ALN1SMTF, CT0404ALN1WB1 and CT0404ALN2WB1) of high frequency wire bondable chip terminations. The new models are available within the Modelithics COMPLETE Library™ as well as the Modelithics mmWave & 5G Library Press Release Modelithics and IEH Corporation Partner to Offer New 3D Geometry Models for Connector Products Modelithics and IEH are pleased to announce the release of 12 new 3D geometry models for IEH hyperboloid connector products. All models are validated for both single-ended and differential S-parameters. The models for the HMM connectors are validated to 40 GHz, while all other models are validated to 20 GHz. Time-domain data is also provided for each model. These models are available as part of the Modelithics COMPLETE+3D Library.
About Modelithics, Inc. Modelithics, Inc. (www.Modelithics.com) was formed in 2001 to address the industry-wide need for high-accuracy RF and microwave active and passive simulation models for use in Electronic Design Automation (EDA). Modelithics' premium product is the Modelithics® COMPLETE Library, which includes the CLR Library™, containing measurement-based Microwave Global Models™ for a multitude of commercially-available passive component families, as well non-linear diode models, non-linear transistor models, and system level component models. Modelithics' services also address a wide range of custom RF and microwave measurement and modeling needs. Modelithics product offerings also include the Modelithics mmWave & 5G Library, Modelithics System Components Library™ the Modelithics COMPLETE+3D Library. Modelithics® is a registered trademark of Modelithics, Inc. Microwave Global Models™, System Components Library™ and CLR Library™ are also trademarks of Modelithics, Inc. The Modelithics Vendor Partner (MVP) Program allows for collaboration and open communication during the development of advanced data sets and models for commercially available microwave components and devices, with flexible sponsorship and distribution arrangements for the resulting data and models. An example of such an arrangement is the Modelithics Qorvo GaN Library, a fully sponsored library distributed for free by Modelithics under sponsorship of Qorvo®. Modelithics also offers a Standard & Custom Test Fixture and Accessory Product Line, including legacy parts from J Micro Technology for a family of thin film Alumina substrate components.
Contact: Angie Rogers
Posted October 19, 2022 |
