Planar Monolithic Industries' (PMI) April 2019 Product Announcement

PMI Model No. SDLVA-0120-70-100M2G-10DBM, SDLVA

PMI model SDLVA-0120-70-100M2G-10DBM is a successive detection log video amplifier (SDLVA) that operates between the 0.1 to 2.0 GHz frequency range. it has a dynamic range of 70 dB minimum and a TSS of -65 dBm. This unit offers a maximum rise time of 25 ns and a fall time of 30 ns. This model provides a limited IF output of +10 dBm typically. Other specifications include VSWR 2.0:1 Max (1.8:1 Typ); Limited IF Output of +10 dBm - Measured 8.31 dBm Min. 11.84 dBm Max; Input Power +10 dBm and power requirements +7 to +18 V @ 300 mA - Measured 117 mA, -7 to -18 V @ 150 mA - Measured 138 mA. Unit size: 3.75 " x 1.50 " x 0.40".

PMI Model No. PMI Model PS-2G18G-360-12D-TS, Phase Shifter

PMI Model PS-2G18G-360-12D-TS is a 2 - 18 GHz, 12-BIT, vector phase shifter making it ideal for frequency translation where continuous monotonic phase shifting is required. This model also features high speed switching, and typically lower than 60 dB harmonic distortion. Specification include Insertion Loss of 18.0 dB Maximum; 360° Phase Shift Range; Switching Speed 410 ns Typical; 12 BIT TTL Compatible; Control Slopes, Linear; Phase Vs Frequency ±15.0° Typical; PM / AM ±3.5 dB Typical; +20 dBm CW, 1.0 Watt Maximum RF Input Power; VSWR of 2.2:1 Max (50 Ohm System); and ±12 VDC to ±15 VDC @±100 mA Maximum Input power. Unit size is 4.25 X 3.50 X 1.00 Inch with SMA Female Input and Output RF connectors, DB-37P, SUB-D Multi-Pin Power / Logic Connector and 10 mV/°C, 3.0 V@ 25°C Temp Sensor.

PMI Model No. 6SFB-HF-CC-100M18G-MAH-RX-TX, Switched Filter Bank

PMI Model No. 6SFB-HF-CC-100M18G-MAH-RX-TX is an integrated module containing two 5-Channel Switched Filter Bank covering 100 MHz to 18.0 GHz. A lossless receive switched filter band and a lossless transmit switched filter bank allow 1 of 5 filter paths to be chosen. Both filter banks can be used simultaneously in different bands. Other specifications Control Logic 3.3V TTL, Input Power +12 V, -12 V, +5 V, +3.3 V and Operating Temperature -40 ºC to +85 ºC. Digital/Power Connector is a 15PIN Micro-D (Mating Connector Provided), RF Connectors SMA (F), and package size 4.80" x 3.08" x 0.365".

PMI Model No. P16T-100M20G-60-T-512-SFF-DEC, SP16T Switch

PMI Model No. P16T-100M20G-60-T-512-SFF-DEC is a single pole, sixteen throw, absorptive pin diode switch that operates from 0.1 to 20.0 GHz. This model has a typical insertion loss of 85 dB and 60 dB of isolation. It operates at 20 dBm CW and is controlled with 4-Bit decoded TTL logic. Other features include removable SMA connectors, +5 VDC @ 750 mA Max, gold plated finish and 8.0" x 3.0" x 0.65" package size.

PMI Model No. PMI Model No. 2SFB-8G26G-CD-SFF, Switched Filter Bank

PMI Model No. 2SFB-8G26G-CD-SFF is a 2-channel switch filter bank providing a low-pass filter that passes 8.62 to 8.70 GHz with a rejection band of 17.24 to 17.4 GHz. In by-pass mode the unit passes signals from 8.0 to 26.5 GHz. This unit is powered by a +5 V single supply and the control logic is TTL/CMOS +5 V compatible. Other specifications include Input RF Power Level (No Damage) +20 dBm CW Max (powered and unpowered), Input IP3 (pin = -10 dBm, DF = 2 MHz) +27 dBm Max, +32 dBm Typ, and Switching Speed 100 ns Max - Measured <100 ns.  RF Input / Output SMA (F) removable connectors and package size 1.5" x 0.8" x 0.5".

PMI Model No. SDLVA-0120-70-0225, SDLVA

PMI Model No. SDLVA-0120-70-0225 is a Successive Detection Log Video Amplifier (SDLVA) that operates over the 200 to 2500 MHz frequency range and has a dynamic range of 65 dB, a TSS of -65 dBm typical and a nominal video bandwidth of 20 MHz. It is designed using cutting edge GaAs technology which provides stunning performance and reliability in a compact package making it an optimum solution for high speed channelized receiver applications. Specifications include VSWR of 2.0:1 Max - (1.5:1 Typ) - Measured 1.3:1; Input Power of +10 dBm, +15 dBm Typ: SMA female connectors and power requirements are +12 to +15 V @ 100 mA, -12 to -15 V @ 190 mA. Unit size is 3.75 " x 1.50 " x 0.40".

PMI Model No. APD-7-328M335R5M-TNC, Power Divider

PMI Model No. APD-7-328M335R5M-TNC is a 7-way power divider that operates over the frequency range 328 to 335.5 MHz. Specifications include insertion loss of 1.2 dB Max; isolation of 20 dB min; VSWR (In/Out) of 1.15:1 Max; Amplitude Balance ±0.2 dB Max (measured ±0.08 dB); Phase Balance of ±2º Max (Measured: ±0.9º); 50 Ohms Impedance; Forward Power 15 W Max and Reverse Power 1 W Max. Unit has painted blue finish and is 7.5" X 6.0" X 0.945" with TNC (Female) connectors. Conformal Coated Per Request.