Hear Ye, Hear Ye
Content is copyright of company represented,
but page format is my copyright - do not distribute it.
Compact, affordable RF /EMI Portable Tent
Test Enclosures allow for bench-top evaluations in an EMI-free environment
December 18, 2017 - Fairport, NY, USA: Saelig Company,
Inc., (Saelig) (www.saelig.com) has
announced the TekBox
TBST120/60/60/2 Shielded Tent which provides an economical RF/EMI-attenuated environment
for a variety of bench-top "EMI quiet" applications. The TBST-120/60/60/2 is a compact
shielded tent, designed to suppress interference from ambient noise during EMC pre-compliance
measurements. With outer dimension of 4' x 2' x 2' it can accommodate pre-compliance
test equipment such as LISNs or TEM-cells or others as well as the device under test,
yet easily fit on a test bench. The TBST-120/60/60/2 shielded tent has been designed
with two layers of conductive fabric, suspended on rigid aluminum supports, the double-layer
design significantly improving the tent's shielding effectiveness. A filter panel mounted
at the side provides one 240V/10A AC filter, two 240V/10A DC filters, and four coaxial
feed through adapters with screw caps. The front opening provides access to the test
space and is closed using conductive hook-and-loop tape in order to avoid compromising
the shielding efficacy.
When measuring the conducted noise spectrum of a powered device being tested in an
unshielded setup, conducted noise to be measured is often hidden below the ambient noise
level, making accurate measurements impossible without eliminating the interference.
Most shielded environments have previously been prohibitively expensive for many situations,
but the TekBox shielded solution is now available at under $2,000.
- Outer dimensions: 47.25" x 24" x 24"
- Opening: 33.5" x 13.8"
- Frame: 0.8" x 0.8"extruded aluminum supports
- Shielding: 2 layers of conductive fabric
- Seal: conductive Velcro tape
- Suspension: Velcro strips
- Filter panel: 1 x 240V/10A AC filter; IEC socket
- 2 x 240V/10A DC filter; cables with female Banana couplers
- 3 x N- female feed through connector with screw caps
- 1 x BNC-female feed through connector
- Attenuation: >58 dB in the range DC to 1.5 GHz
- Weight: 23.75lb
Applications include: wireless device testing, EMC pre-compliance testing, secure
communications, satellite communications, medical equipment shielding, operator safety,
etc. This high-attenuation enclosure, created by EMI experts TekBox, is available now
from their authorized North American distributor Saelig Company, Inc. Fairport, NY.
For detailed specifications, free technical assistance, or additional information,
please contact (toll-free in the US) 1-888-7SAELIG, via email:
or visit www.saelig.com
About Saelig Company, Inc.
Founded in 1988 in Rochester, New York, Saelig is a North American distributor with
a growing reputation for finding and sourcing unique, easy-to-use control and instrumentation
products and related active components, for use in a variety of industries. Products
lines are continuously added from sources across the globe, and are offered at highly
competitive prices, accompanied by full in-house technical support, exceptional customer
service, and fast delivery. For full details of available product lines, please visit
Saelig Company, Inc.
71 Perinton Parkway
USA Toll-Free: (888) 7-SAELIG
Tel: (585) 385-1750
Posted December 22, 2017