Content is copyright of company represented,
but page format is my copyright - do not distributed.
Press Release Archives:
Planar Monolithic Industries (PMI) recently
introduced four new products in their extensive line of RF and microwave components.
Included are a 1-18 GHz low noise amplifier; a 1 to 18 GHz, a 1 to 18 GHz high speed
threshold detector; a 11.825 GHz bandpass filter with a 1,850 MHz pass band; and a single
pole, seven throw absorptive switch with phase and amplitude matching of ±6° and ±0.5
dB. Contact PMI today for more information.
PMI Model No. PE2-30-1R018R0-4R5-22-12-SFF-1
PMI Model No.
PE2-30-1R018R0-4R5-22-12-SFF-1 is a 1.0 to 18.0 GHz, low noise amplifier
that typically provides 30 dB of gain while maintaining a maximum gain flatness of ±1.5
dB over the operating frequency. The noise figure is 4.5 dB maximum and offers an OP1dB
of 22 dBm minimum. Operating voltage is +12 to +15 VDC with a typical current draw of
500 mA. The unit is supplied with removable SMA(F) connectors in our standard PE2 housing.
PMI Model No. TD-1G12G-RL-CD-SFF-NH
PMI Model Number
TD-1G12G-RL-CD-SFF-NH is a High Speed Threshold Detector designed
to operate over the 1 to 12 GHz Frequency Range, with an Adjustable Threshold Level of
-30 to -10 dBm, VSWR of 3.0:1 Typical. This Unit comes in a Very Small Size with Field
Removable SMA Connectors on the Input and Output. This unit has an active High output.
PMI Model No. BPF-11D825D-1D85G-60DB-SFF
PMI Model No.
BPF-11D825D-1D85G-60DB-SFF is a band pass filter centered at 11.825
GHz. The 1 dB bandwidth is 1850 MHz. Insertion loss 3 dB maximum, rejection -60 dBc minimum
@ 9.15 to 9.9 GHz and -60 dBc minimum @ 13.75 to 14.5 GHz and VSWR 2.0:1. SMA (F) connectors,
blue painted surface and package size of 1.27" x 0.28" x 0.32".
PMI Model No. P7T-2G18G-60-T-1W
PMI Model No.
P7T-2G18G-60-T-1W is a single pole, seven throw absorptive switch
with phase and amplitude matching of ±6° and ±0.5 dB respectively, relative to J2. This
model has also been designed to operate over the 2.0 to 8.0 GHz, frequency range with
low in-band video leakage of -65 dBm. Features include SMA female connectors. Unit size
is 1.83" x Ø1.50" with a painted blue finish.
About Planar Monolithics Industries (PMI)
Planar Monolithics was founded basically to take advantage of the growing demand in
monolithic-based products using the hybrid MIC/MMIC technology innovations that are mushrooming
in a big way all over the world. High performance and reliable products can be obtained
by using this technology. Planar Monolithics will meet these requirements. Planar Monolithics
organization has been setup to design, develop, manufacture, test, and market complex
state-of-the-art hybrid RF/microwave and monolithic integrated circuits (MIC/MMIC) and
components, and hybrid MIC/MMIC supercomponents and subsystems. Planar Monolithics provides
its unique products for applications in space, military, communications, telecommunications,
commercial, and consumer electronics systems.
Director of Sales & Marketing
Planar Monolithics Industries, Inc.
7311-F Grove Road
CAGE Code: 05XQ0
Phone: (301) 662-5019
Cell: (301) 455-9897
Posted November 29, 2017