SIG-101 provides oscilloscope, waveform generator, signature analyzer, vector network analyzer and
digital I/O in one box.
Fairport, NY, USA: Saelig Company, Inc. (www.saelig.com)
has introduced the Syscomp SIG-101
Signature Analyzer - a PC-based two-channel 200 kHz oscilloscope, sampling at 2MSa/s, that includes
an arbitrary waveform generator, and an 8-bit digital I/O port. Building on the CGR-101, its successful
predecessor, the SIG-101 also adds calibrated signature techniques to the oscilloscope waveform display
capabilities for quickly troubleshooting circuit boards. Unlike most PC-based oscilloscopes with 8-bit
A/D sampling, the SIG-101 has an 11-bit A/D that gives eight times more detail, and the built-in 12-bit
200 kHz arbitrary waveform signal generator can be used to create swept, stationary, or noise test signals,
or provide PWM outputs. The oscilloscope and waveform generator can be combined to provide Vector Network
Analysis capability, yielding Bode plots that graph the frequency response of a circuit.
The Syscomp SIG-101 also provides calibrated signature analysis
with a wide amplitude and frequency range. Signature analysis is a powerful technique for detecting
faults on PCBs: an AC voltage is injected into the test point of a circuit board and the analyzer then
plots the voltage and resultant current on an X-Y display. This display is a 'signature' of the circuit
operation, which can be compared against a known 'good' pattern or board. If the patterns do not match,
the test board is defective. For example, when testing a node, a capacitor will show an ellipse, a resistor
shows a straight line at an angle, a diode shows the characteristic exponential curve. Signature analysis
is popular in production test because it requires no understanding of the circuit operation, and so
it can be used by unskilled technical personnel. The Syscomp SIG-101 represents an advance over existing
signature analysis instruments: it costs a fraction of existing signature analysis instruments, and
the frequency range of the test signal is continuous, extended over a wide range, allowing a wider range
of useful measurements. The test voltage and measured current are calibrated, so the results can be
translated into accurate component values. Signature and other waveforms can be saved, retrieved, and
All functions can be controlled via a USB2.0-connection from a computer running Windows, Linux, or
Mac operating systems, using the open-source GUI software provided. The SIG-101 can be used for production
test, education, or for general purpose measurements for field technicians and engineers.
Powered by an external 110VAC wall adapter switching supply, and made in Canada by Syscomp Design,
the Syscomp SIG-101 is available now from stock from Saelig Company, Inc. Fairport NY at only $399.95.
1-888-7SAELIG, via email:
firstname.lastname@example.org, or visit www.saelig.com.
About Saelig Company, Inc.
Founded in 1988 in Rochester, New York, Saelig is a North American distributor with a growing reputation
for finding and sourcing unique, easy-to-use control and instrumentation products and related active
components, for use in a variety of industries. Products lines are continuously added from sources across
the globe, and are offered at highly competitive prices, accompanied by full in-house technical support,
exceptional customer service, and fast delivery. For full details of available product lines, please
Saelig Company, Inc.
71 Perinton Parkway
Fairport, NY 14450
USA Toll-Free: (888) 7-SAELIG
Tel: (585) 385-1750
Posted September 23, 2016