Rohde & Schwarz Unveils New USB and LAN Diode Sensors for Fast and Accurate Power Measurements

Rohde & Schwarz logo

Rohde & Schwarz has enhanced its sensor portfolio. New models of its three-path diode sensors offer even more flexibility. In addition to the well-established USB sensors, new sensors that support LAN are now available. LAN is the ideal choice for remotely controlled applications over large distances.

Munich, February 19, 2015 -- Rohde & Schwarz presents its new R&S NRPxxS and R&S NRPxxSN USB three-path diode power sensors. The completely redesigned sensors offer unprecedented measurement speed and measurement accuracy, even at low levels. The R&S NRPxxSN model offers both a USB and a LAN interface. Both power sensor models are available for three different frequency ranges, from 10 MHz to 8 GHz, to 18 GHz and to 33 GHz - the largest choice of ranges on the market.

Outstanding measurement speed

The R&S NRPxxS/SN sensors enable 10 000 triggered measurements per second with a minimum trigger resolution of 100 µs. A special mode even permits in excess of 50 000 equidistant measurements per second. And the improved three-path diode design made it possible to decrease the lower measurement limit to -70 dBm. The result is a very wide dynamic range of 93 dB and instruments that can measure up to four times faster than previous solutions, especially at low levels.

LAN operation via web browser

Rohde & Schwarz Unveils New USB and LAN Diode Sensors for Fast and Accurate Power Measurements - RF CafeThe new LAN interface on the R&S NRPxxSN model now allows remote power measurements over large distances. For example, it is possible to control monitoring applications for satellite systems or particle accelerators via a central PC by placing sensors at various positions in the system. The power sensor is conveniently controlled from a GUI accessed via web browser. No additional software is needed.

Numerous test modes for a wide variety of applications Thanks to their outstanding performance, R&S NRPxxS/SN power sensors help mobile communications users perform power measurements on signals such as GSM, 3GPP, LTE and LTE-Advanced. The 33 GHz model is also ideal for development and production of anticollision radar systems in the automotive sector. The continuous average, burst average, timeslot average, gate average and trace measurement test modes all remain available.

The new R&S NRP8S, R&S NRP18S and R&S NRP33S USB three-path diode sensors and the R&S NRP8SN, R&S NRP18SN and R&S NRP33SN USB/LAN diode sensors are now available from Rohde & Schwarz. For more information, visit www.rohde-schwarz.com/ad/press/powersensors

 

 

About Rohde & Schwarz

The Rohde & Schwarz electronics group is a leading supplier of solutions in the following business fields: test and measurement, broadcast and media, secure communications, radiomonitoring and radiolocation. Founded more than 80 years ago, this independent company has an extensive sales and service network and is present in more than 70 countries. On June 30, 2014, Rohde & Schwarz had approximately 9800 employees. It achieved a net revenue of EUR 1.75 billion in the 2013/2014 fiscal year (July to June). The company is headquartered in Munich, Germany. It also has regional headquarters in Singapore and Columbia, Maryland, USA, to manage its operations in these regions.

 

 

Contacts

Europe, Africa, Middle East
+49 89 4129 12345
customersupport@rohde-schwarz.com

North America
+1 888 837 87 72
customer.support@rsa.rohde-schwarz.com

Latin America
+1 410 910 79 88
customersupport.la@rohde-schwarz.com

Asia Pacific
+65 65 13 04 88
customersupport.asia@rohde-schwarz.com

China
+86 800 810 8228 or +86 400 650 5896
customersupport.china@rohde-schwarz.com

 

 

 

 

Posted  February 19, 2015