New Product Listings
20.0 MHz to 6.0 GHz, 20.0 MHz to 6.0 GHz, Single Pole, Eight Throw, Reflective Switch
PMI Model No. P8T-20M6G-80-R-515-SFF
PMI Model No. P8T-20M6G-80-R-515-SFF is a single pole, eight throw, reflective switch module with low
insertion loss, high isolation and an integral decoded 3-bit TTL driver designed for 20 MHz to 6.0 GHz operation.
The unit has a maximum switching speed of 250 ns and maximum operating power of 23 dBm CW max.
2.0 to 18.0 GHz, 8-Bit Digitally Controlled Phase Shifter
PMI Model No. PS-255-2G18G-8B-SFF
PMI Model No. PS-255-2G18G-8B-SFF is a 2.0 to 18.0 GHz 8 Bit Digitally Controlled Phase Shifter with capability
for phase shifting from 0° of 255° with resolution as fine as 1.0°. This unit has a typical insertion loss of 18
dB and a typical VSWR of 2.5:1. The DC Voltage requirement is +12 V to +15 V with typical current draw of 200 mA.
The unit is supplied in a housing measuring 2.0" x 2.1" x 0.5".
18.0 to 40.0 GHz, High Power Limiter
PMI Model No. LM-18G40G-SMT-1 is a high power limiter capable of withstanding an input power level of 20 Watts,
440 to 670 nsec Pulse Width, PRF 600 to 900kHz, 40% Duty Cycle. This model operates in the 18 GHz to 40 GHz frequency
range. The insertion loss is 4.0 dB maximum, VSWR of 2.0:1 and 250 nsec response time. This limiter is supplied
on a surface mount / drop-in carrier that measures 0.198" x 0.270" x 0.016".
3.1 to 3.5 GHz, 4-Way Power Divider Module
PMI Model No. APD-4-3D13D5-40W-SFF
PMI Model No. APD-4-3D13D5-40W-SFF is a 3.1 GHz to 3.5 GHz 4-Way Power Divider that offers maximum insertion
loss of 0.45 dB with 23 dB minimum port to port isolation. This power divider is port to port phase matched within
±2°. Field removable SMA female connectors are offered in a housing measuring 2.56" x 1.77" x 0.44".
3.1 to 3.5 GHz, 8-Way Power Divider Module
PMI Model No. APD-8-3D13D5-40W-SFF
PMI Model No. APD-8-3D13D5-40W-SFF is a 3.1 GHz to 3.5 GHz 8-Way Power Divider that offers maximum insertion
loss of 0.6 dB with 23 dB minimum port to port isolation. This power divider is port to port phase matched within
±2°. Field removable SMA female connectors are offered in a housing measuring 4.10" x 2.15" x 0.44".
About Planar Monolithics Industries (PMI)
Planar Monolithics was founded basically to take advantage of the growing demand in monolithic-based products
using the hybrid MIC/MMIC technology innovations that are mushrooming in a big way all over the world. High performance
and reliable products can be obtained by using this technology. Planar Monolithics will meet these requirements.
Planar Monolithics organization has been setup to design, develop, manufacture, test, and market complex state-of-the-art
hybrid RF/microwave and monolithic integrated circuits (MIC/MMIC) and components, and hybrid MIC/MMIC supercomponents
and subsystems. Planar Monolithics provides its unique products for applications in space, military, communications,
telecommunications, commercial, and consumer electronics systems.
Planar Monolithics Industries Inc.
7311-F Grove Road
Frederick, Maryland 21704, USA
Phone: (301) 662-5019
FAX: (301) 662-1731
Posted July 21, 2015