Planar Monolithic Industries (PMI) Intros 4 New RF Products

Planar Monolithics Industries banner - RF Cafe 

New Product Listings

18.0 to 40.0 GHz Successive Detection Log Video Amplifier (SDLVA)

PMI Model No. PS-255-2G18G-8B-SFF - RF Cafe

PMI Model No. SDLVA-18G40G-65-CD-292FF

PMI Model No. SDLVA-18G40G-65-CD-292FF is a Successive Detection Log Video Amplifier (SDLVA) that operates between the 18.0 to 40.0 GHz frequency range. It has a dynamic range of 65 dB, log slope of 25 mV/dB and a nominal video bandwidth of 32 MHz. Furthermore, it has been designed using cutting edge GaAs technology which provides stunning performance and reliability in a compact package making it an optimum solution for high speed channelized receiver applications.

6380 to 7440 GHz Voltage Variable Attenuator 

PMI Model No. DTA-6380M7440M-60-9BDIFF-SFF - RF Cafe

PMI Model No. DTA-6380M7440M-60-9BDIFF-SFF 

PMI Model No. DTA-6380M7440M-60-9BDIFF-SFF is a Voltage Variable Attenuator with a control interface which allows for nine differential inputs to control the attenuator settings with a LSB of 0.25 dB and a minimum attenuation of 50 dB. This attenuator operates over the frequency range of 6380 to 7440 GHz.

1.0 GHz to 1.1 GHz Single Pole, Two Throw Hermetically Sealed Reflective Switch

PMI Model No. P2T-1G1R1G-25-R-SFF-100W - RF Cafe

PMI Model No. P2T-1G1R1G-25-R-SFF-100W

PMI Model No. P2T-1G1R1G-25-R-SFF-100W is a Single Pole, Two Throw Hermetically Sealed Reflective Switch designed to operate over the 1.0 GHz to 1.1 GHz frequency range. This model is designed to handle 100 watts average input power and 5 KW peak having a 17 μsec pulse width and 2% duty cycle.

0 to 180 Degree Bi-Phase Modulator/Phase Shifter 

PMI Model No.PS-90-2040 Opt HS15NS - RF Cafe

PMI Model No. PS-90-2040 Opt HS15NS 

PMI Model No. PS-90-2040 Opt HS15NS is a Miniature, 0 to 180 Degree Bi-Phase Modulator/Phase Shifter with TTL control logic (ECL logic available) operating over a frequency range of 2.0 to 4.0 GHz with a maximum insertion loss of 2.5 dB and VSWR better than 2.0:1. This model provides two phase states, namely 0 degrees and 180 degrees and is controlled via single line TTL. The phase state is switched in 15 ns or less and can handle input power levels up to 0.5 watt CW, 1 us pulse width. DC voltage requirement is +5 and -5. This unit is supplied in a package measuring 1.00" x 1.00" x 0.50".

About Planar Monolithics Industries (PMI)

Planar Monolithics was founded basically to take advantage of the growing demand in monolithic-based products using the hybrid MIC/MMIC technology innovations that are mushrooming in a big way all over the world. High performance and reliable products can be obtained by using this technology. Planar Monolithics will meet these requirements. Planar Monolithics organization has been setup to design, develop, manufacture, test, and market complex state-of-the-art hybrid RF/microwave and monolithic integrated circuits (MIC/MMIC) and components, and hybrid MIC/MMIC supercomponents and subsystems. Planar Monolithics provides its unique products for applications in space, military, communications, telecommunications, commercial, and consumer electronics systems.


Planar Monolithics Industries Inc.
7311-F Grove Road
Frederick, Maryland  21704, USA
CAGE Code: 05XQ0
Phone: (301) 662-5019
FAX: (301) 662-1731



Posted July 30, 2015