everything RF Intros New RF & Microwave Products at EuMW 2013 |
 Oct 9, 2013 The European Microwave Week is the largest Event for the RF & Microwave Industry in Europe. This year it is being held in Nuremberg, Germany from the 6th to the 11th of October. There are over 200 Companies that are taking part in the exhibition here. Today's newsletter lists some new products that have been announced this week at the EuMW 2013. New RF & Microwave Products at the EuMW 2013  67
GHz Signal and Spectrum AnalyzerSpectrum Analyzer from Rohde & Schwarz The R&S FSW67 from Rohde & Schwarz is a high-end signal and spectrum analyzer which has a frequency range up to 67 GHz, an integrated preamplifier up to 67 GHz and an analysis bandwidth as high as 320 MHz. The analyzer helps developers perform complex measurement tasks in the microwave range for aerospace & defense applications and wireless communications. With an analysis bandwidth of 320 MHz it can also measure wideband, hopping and chirp signals. Download Datasheet | Product Details  20
GHz Vector Network Analyzer - 2 Port, 3.5 mm - Male ConnectorsVector Network Analyzer from Rohde & Schwarz The R&S ZNB20 from R&S is a mid range vector netwok analyzer with two or four test ports for the frequency range from 100 kHz to 20 GHz. It has a dynamic range of 135 dB which makes it possible to perform precise measurements on wideband DUTs or components whose behavior at low frequencies is especially important. The analyzer has a large 12.1" touch screen inteface which makes it easy to control and review test results. The ports on the R&S 20 have 2.92 mm Male connectors. Download Datasheet | Product Details
The R&S ZNB40 from R&S is a mid range vector netwok analyzer with two or four test ports for the frequency range from 100 kHz to 40 GHz. It has a dynamic range of 135 dB which makes it possible to perform precise measurements on wideband DUTs or components whose behavior at low frequencies is especially important. The analyzer has a large 12.1" touch screen inteface which makes it easy to control and review test results. The ports on the R&S 20 have 2.92 mm Male connectors. Download Datasheet | Product Details
The R&S SMW200A from Rohde and Schwarz is a touch screen vector signal generator which can generate signals of up to 3 or 6 GHz. It can provide up to 18 dBm of an output power, has a phase noise of -139 dBc/Hz and a setting time of 1 ms. The R&S SMW200A is ideal for generating complex, digitally modulated signals for the communication, aerospace and defense sectors. Download Datasheet | Product Details
A vector signal transceiver (VST) is a new class of instrumentation that combines a vector signal generator (VSG) and vector signal analyzer (VSA) with FPGA-based real-time signal processing and control. The Vector signal transceivers from National Instruments also features a user-programmable FPGA, which allows custom algorithms to be implemented directly into the hardware design of the instrument. Download Datasheet | Product Details
PXI Signal Analyzer from Agilent Technologies The M9391A PXI VSA modular vector signal analyzer operates from 1 MHz to 6 GHz. A typical PXI VSA configuration includes four individual PXI modules - M9300A frequency reference, M9301A synthesizer, M9350A downconverter and the M9214A digitizer. The M9391A works seamlessly with the M9281A PXI VSG software, SystemVue and X-Series measurement applivations for modular instruments which supports a host of applications like LTE, W-CDMA, 802.11, WLAN and many more. Download Datasheet | Product Details
PXI Signal Analyzer from Agilent Technologies The M9392A from Agilent is a PXI Vector Signal Analyzer that operates from 50 MHz to 26.5 GHz. When this module is combined with Agilent's 89600 VSA software, it provides a complete Microwave Vector Signal Analyzer solution enabling analysis of communications, radar, and avionics signals in a modular, open-system standard. The M9392A PXI Vector Signal Analyzer system consists of the M9202A PXIe IF Digitizer, M9302A PXI Local Oscillator, M9360A PXI Attenuator/Preselector, and the M9361A and M9351A PXI Downconverter Modules. Download Datasheet | Product Details
Vector Network Analyzer from Copper Mountain Technologies The 5048 from Copper Mountain Technologies is a 4.8 GHz, 2 Port Virtual Vector Network Analyzer intended for the measurement of S11 and S21 parameters. The VNA is extreamly compact and is controlled/run using a PC. It has a dynamic range of 125 dB and can measure up to 200,001 measurement points. It has an excellent solution for magnitude and phase measurements. This VNA comes in two configurations, S5048 and TR5048. Download Datasheet | Product Details
RF Amplifier from RFHIC The HT1818-15M is a E-pHEMT GaAs + GaN on SiC Power Amplifier that has been designed for LTE Repeaters, Small Cell Base Statoins and RF Sub-Systems. The Amplifier operates from 1805 to 1880 MHz and has a gain of 34 dB and a high output power of 33 dBm with 41.5 dBm saturated power. It has a high breakdown voltage, high efficiency and is matched to 50 ohms. It is available in a compact surface mount package. Download Datasheet | Product Details
RF Amplifier from RFHIC The HR5459-25BC from RFHIC is a GaN-SiC HEMT, 2-stage hybrid power amplifier which operates from 5.4 GHz to 5.9 GHz. It provides a gain of 21.5 dB with a flatness of 1 dB and 43.5 dBm of power with an efficiency of 45%. The amplifier has an OIP3 of 28 dBm and requires a 40 V supply. It is ideal for point to point and radio systems applications. The HR5459-25BC is available in a surface mount package which measures 20.5 x 12.5 x 4.8 mm and is matched to 50 Ohms. Download Datasheet | Product Details
GaN Transistor from Triquint The T1G4020036-FL is a 200 W GaN transistor which operates from Dc to 3.3 GHz. It provides 56 dBm of saturated power with an efficiency of 50% and a gain of 13 dB. The T1G4020036-FL requires a 36 V supply and draws 720 mA of current. It is ideal for commercial and defense systems. It is available in a flanged ceramic package. Product Details
RF Amplifier from Triquint The TGA2450-SM from Triquint is a GaAs, 3 stage power amplifier module which operates from 2110 MHz to 2170 MHz. It provides up to 2.5 W of power with an efficiency of 35% and a gain of 34 dB with a flatness of 2 dB. It has a group relay of 5 ns with a ripple of 750 ps, a noise figure of 3 dB, a second harmonic of -43 dBc and third harmonic of -37 dBc. The amplifier is ideally used in Small Cell Base Stations, 3G/4G Wireless Infrastructure, linearized transmitters, W-CDMA/ LTE/ CDMA and other heterogeneous network applications. Download Datasheet | Product Details
Millimeterwave Amplifier from API Technologies The BXHF1075 from API Technologies is a Millimeterwave Amplifier that operates from 43 to 44 GHz with both high efficiency, and extreme stability. It has a gain of 30 dB, a return loss of 13 dB, provides an output power of 17 dBm and requires a 15 V supply. It also incorporates an internal voltage regulator to accommodate either +12 volts or +15 volts. Download Datasheet | Product Details
Laminate from Park Electrochemical Corp The NL9000 from Park Electrochemical Corp is a PTFE laminate that has been designed for critical RF/Microwave components, antennas, power amplifiers and subassemblies. It has exceptional mechanical and electrical performance with a Dk of 2.94, 3, 3.2 and 3.5 with a very low loss of 0.0017 (at 10 GHz). NL9000 materials are dimensionally stable for efficient circuit fabrication, can be combined in hybrid multilayer constructions with other circuit materials, including digital circuit materials, and can be processed using industry standard PTFE parameters. Download Datasheet | Product Details [borders/inc-300x250.htm]About everything RF everything RF – www.everythingrf.com is a parametric search tool for the RF & Microwave Industry listing over 70,000 RF & Microwave Products from more than 180 Manufacturers. Engineers from the Communication, Military and Space companies use everything RF to find products that meet their specification. For more information please contact: everything RF Tel: +1-312-436-0084 Email: contact@everythingRF.com Posted October 15, 2013 |
Vector
Signal Generator for applications up to 3 & 6 GHz
6
GHz Vector Signal Transceiver - with a Programmable FPGA Module
PXI
Vector Signal Analyzer from 1 MHz to 6 GHz
PXI
Vector Signal Analyzer from 50 MHz to 26.5 GHz
Virtual
Vector Network Analyzer from 20 kHz to 4.8 GHz
1805
to 1880 MHz, GaAs + GaN Hybrid Power Amplifier for LTE Repeaters
5.4
to 5.9 GHz, GaN Hybrid Power Amplifier
DC
to 3.3 GHz, 200 W Transistor
2100
MHz, 2.5 W, Small Cell Power Amplifier Module
PTFE
laminate for RF/Microwave Applications with Dk from 2.94 to 3.5 and Df of 0.0017