PMI Intros 500 MHz to 18 GHz Positive Gain Slope Low Noise Amplifier
March 15, 2013 Press Release
PMI Model No.
PE2-1020-R518-12-SFF is a low noise amplifier that offers a positive gain slope versus frequency.
This type of amplifier is useful when trying to equalize frequency flatness over a broad bandwidth.
This model provides 10 dB of gain at 500 MHz and 20 dB of gain at 18 GHz.
The noise figure is 10 dB at 500 MHz and 9 dB at 18 GHz. The OP1dB is +14 dBm
minimum and the maximum VSWR is 2.5:1. The operating voltage is +15 VDC and the current
draw is 140 mA typical. This model is supplied in PMI's standard PE2 housing. Other gain
levels and frequency ranges are available.
About Planar Monolithics Industries
Planar Monolithics provides its unique
products for applications in space, military, communications, telecommunications, commercial,
and consumer electronics systems. Planar Monolithics Industries, Inc. has been set up to manufacture
and market various MIC/MMIC (Microwave Integrated Circuits and Monolithics Microwave Integrated
Circuits) Components, Supercomponents, and Subsystems for applications in Telecommunications,
Terrestrial, Satellite, and Mobile-Radio Communications, Defense (ECM, ECCM, ESM, Radars, and
Electronic Warfare), Cable-TV, Navigation and Marine Electronics, FAA/DOT-Avionics, Ground Based
Systems, and Microwave Landing Systems.
Planar Monolithics Industries Inc.
Frederick, Maryland 21704, USA
Phone: (301) 662-5019