PMI Intros 2.0 to 18.0 GHz Low Noise Amplifier
March 15, 2013 Press Release
PMI Model No. PEC3-33-218-20-15-SFF-HS-E is a 2.0 to 18.0 GHz Low Noise Amplifier that provides greater than 33 dB of gain while maintaining a maximum gain flatness of ±2.0 dB maximum over the operating frequency. The noise figure is 4 dB typical and offers an OP1dB of +20 dBm minimum and an OIP3 of +30 dBm typical. The operating voltage is +15 VDC and the current draw is typically 350 mA. This amplifier is supplied in a hermetically sealed housing that measures 1.91" x 0.78" x 0.36" and is designed for use within an airborne application.
About Planar Monolithics Industries
Planar Monolithics provides its unique products for applications in space, military, communications, telecommunications, commercial, and consumer electronics systems. Planar Monolithics Industries, Inc. has been set up to manufacture and market various MIC/MMIC (Microwave Integrated Circuits and Monolithics Microwave Integrated Circuits) Components, Supercomponents, and Subsystems for applications in Telecommunications, Terrestrial, Satellite, and Mobile-Radio Communications, Defense (ECM, ECCM, ESM, Radars, and Electronic Warfare), Cable-TV, Navigation and Marine Electronics, FAA/DOT-Avionics, Ground Based Systems, and Microwave Landing Systems.
Planar Monolithics Industries Inc.
7311-F Grove Road
Frederick, Maryland 21704, USA
Phone: (301) 662-5019
FAX: (301) 662-1731