March 15, 2013 Press Release
PMI Model No. PE2-25-218-20-12-SFF is a 2.0 to 18.0 GHz Low Noise Amplifier that provides
greater than 25 dB of gain while maintaining a maximum gain flatness of ±1.5 dB maximum
over the operating frequency. The noise figure is 4.5 dB typical and offers an OP1dB of
+20 dBm minimum. The operating voltage is +12 to 15 VDC and the current draw is 300 mA
maximum. This amplifier is supplied in a our PE2 package that measures 1.08" x 0.71" x 0.29".
Datasheet:
http://www.pmi-rf.com/Products/amplifiers/PE2-25-218-20-12-SFF.htm
Quick Links:
Product Features
Test Report
[borders/inc-300x250.htm]
About Planar Monolithics Industries Planar Monolithics provides its unique
products for applications in space, military, communications, telecommunications, commercial,
and consumer electronics systems. Planar Monolithics Industries, Inc. has been set up to manufacture
and market various MIC/MMIC (Microwave Integrated Circuits and Monolithics Microwave Integrated
Circuits) Components, Supercomponents, and Subsystems for applications in Telecommunications,
Terrestrial, Satellite, and Mobile-Radio Communications, Defense (ECM, ECCM, ESM, Radars, and
Electronic Warfare), Cable-TV, Navigation and Marine Electronics, FAA/DOT-Avionics, Ground Based
Systems, and Microwave Landing Systems.
Contact
Planar Monolithics Industries Inc. 7311-F
Grove Road Frederick, Maryland 21704, USA Phone: (301) 662-5019 FAX: (301)
662-1731 E-MAIL:
sales@pmi-rf.com
Posted 3/15/2013 |