January 27, 2013 Press Release
PMI Model No.
PE2-30-218-4R0-20-12-SFF-BT is a 2.0 to 18.0 GHz Low Noise Amplifier that has an integrated
bias-tee network on the output port. This amplifier provides 30 dB of gain while maintaining
a maximum gain flatness of ±2.0 dB max over the operating frequency. The noise figure is
less than 4dB and offers an OP1dB of +20 dBm minimum and an OIP3 of +30 dBm typical.
The amplifier requires +12 to +15 VDC and the current draw is less than 350 mA.
Datasheet:
http://www.pmi-rf.com/Products/amplifiers/PE2-30-218-4R0-20-12-SFF-BT.htm
[borders/inc-300x250.htm]Quick
Links:
Product Feature
Test Report
About Planar Monolithics Industries Planar
Monolithics provides its unique products for applications in space, military, communications,
telecommunications, commercial, and consumer electronics systems. Planar Monolithics Industries,
Inc. has been set up to manufacture and market various MIC/MMIC (Microwave Integrated Circuits
and Monolithics Microwave Integrated Circuits) Components, Supercomponents, and Subsystems for
applications in Telecommunications, Terrestrial, Satellite, and Mobile-Radio Communications,
Defense (ECM, ECCM, ESM, Radars, and Electronic Warfare), Cable-TV, Navigation and Marine Electronics,
FAA/DOT-Avionics, Ground Based Systems, and Microwave Landing Systems.
Contact
Planar Monolithics Industries Inc. 7311-F
Grove Road Frederick, Maryland 21704, USA Phone: (301) 662-5019 FAX: (301)
662-1731 E-MAIL:
sales@pmi-rf.com
Posted 2/28/2013
|