March 15, 2013 Press Release
PMI Model No.
is a 2.0 to 18.0 GHz Low Noise Amplifier which provides 20 dB of gain while maintaining
a gain flatness of ±2.0 dB maximum over the operating frequency. The noise figure is 4 dB
typical and offers a typical OP1dB of +14 dBm minimum. The amplifier requires +12 to +15 VDC
and the current draw is 150 mA typical. The unit is supplied with SMA(F) connectors in
our standard PE2 housing.
About Planar Monolithics Industries
Monolithics provides its unique products for applications in space, military, communications,
telecommunications, commercial, and consumer electronics systems. Planar Monolithics Industries,
Inc. has been set up to manufacture and market various MIC/MMIC (Microwave Integrated Circuits
and Monolithics Microwave Integrated Circuits) Components, Supercomponents, and Subsystems for
applications in Telecommunications, Terrestrial, Satellite, and Mobile-Radio Communications,
Defense (ECM, ECCM, ESM, Radars, and Electronic Warfare), Cable-TV, Navigation and Marine Electronics,
FAA/DOT-Avionics, Ground Based Systems, and Microwave Landing Systems.
Planar Monolithics Industries Inc.
Frederick, Maryland 21704, USA
Phone: (301) 662-5019