January 27, 2013 Press Release
PMI Model No.
PE2-30-0R56R0-5R0-22-12-SFF is a 500 MHz to 6.0 GHz low noise amplifier that typically
provides 30 dB of gain. The gain flatness is ±1.0 dB maximum with a noise figure is
5.0 dB typical. This amplifier provides a minimum OP1dB of +21 dBm. The VSWR is 2.0:1
maximum into 50 ohms impedance and operates on a single DC supply of +12 to +15 volts with
325 mA nominal current consumption. This unit is supplied with field removable SMA female
connectors and in our standard PE2 housing that measures 1.08" x 0.71" x 0.29".
Datasheet:
http://www.pmi-rf.com/Products/amplifiers/PE2-30-0R56R0-5R0-22-12-SFF.htm
[borders/inc-300x250.htm]Quick
Links:
Product Feature
Test Report
About Planar Monolithics Industries
Planar Monolithics provides its unique products for applications in space, military, communications,
telecommunications, commercial, and consumer electronics systems. Planar Monolithics Industries,
Inc. has been set up to manufacture and market various MIC/MMIC (Microwave Integrated Circuits
and Monolithics Microwave Integrated Circuits) Components, Supercomponents, and Subsystems for
applications in Telecommunications, Terrestrial, Satellite, and Mobile-Radio Communications,
Defense (ECM, ECCM, ESM, Radars, and Electronic Warfare), Cable-TV, Navigation and Marine Electronics,
FAA/DOT-Avionics, Ground Based Systems, and Microwave Landing Systems.
Contact
Planar Monolithics Industries Inc. 7311-F
Grove Road Frederick, Maryland 21704, USA Phone: (301) 662-5019 FAX: (301)
662-1731 E-MAIL:
sales@pmi-rf.com
Posted / /2013
|