PMI Intros Integrated Frequency Downconverter for Doppler Radar Systems

PMI Intros Integrated Frequency Downconverter for Doppler Radar Systems - RF CafePMI header

October 10, 2013 Press Release

PMI Model No. PIFA-9D4G-1D8G-1 is an integrated frequency down converter used within Doppler Radar Systems. The RF Input is 9.4 GHz ±30 MHz with an input dynamic range of 100 to 0dBm. The LO Input is 2.803 GHz ±15 MHz with a power level of +5 to +7 dBm. The resulting IF Output Frequency is 1.8 GHz ±10 MHz. The RF to IF gain is 10 dB to 13 dB. This module incorporates internal RF, IF and LO filtering and amplification for optimum out of band rejection and superior electrical performance. The group delay ripple from RF to IF Output is less than 0.1 ns over a 20 MHz bandwidth. The OIP3 is greater than 25 dBm. The module operates on single supply of +12 volts and is supplied with SMA female connectors in a package measuring 1.8" x 1.15" x 0.4".


Quick Links:
Product Features
Test Report


http://www.pmi-rf.com/products/multifunctionmodules/PIFA-9D4G-1D8G-1.htm


PMI Model No. PIFA-9D4G-1D8G-1 electrical specifications - RF Cafe

[borders/inc-300x250.htm]
About Planar Monolithics Industries
Planar Monolithics provides its unique products for applications in space, military, communications, telecommunications, commercial, and consumer electronics systems. Planar Monolithics Industries, Inc. has been set up to manufacture and market various MIC/MMIC (Microwave Integrated Circuits and Monolithics Microwave Integrated Circuits) Components, Supercomponents, and Subsystems for applications in Telecommunications, Terrestrial, Satellite, and Mobile-Radio Communications, Defense (ECM, ECCM, ESM, Radars, and Electronic Warfare), Cable-TV, Navigation and Marine Electronics, FAA/DOT-Avionics, Ground Based Systems, and Microwave Landing Systems.


Contact
Planar Monolithics Industries Inc.
7311-F Grove Road
Frederick, Maryland  21704, USA
Phone: (301) 662-5019
FAX: (301) 662-1731
E-MAIL: sales@pmi-rf.com



Posted  November 26, 2013