October 10, 2013 Press Release
PMI Model No.
Rev. B is a 0.25 to 8.5 GHz, low noise amplifier with a small signal
gain window of +9.0 dB to +13 dB. The noise figure for this unit is ≤4.5 dB
max (valid from 0.5 to 8.5 GHz) and offers an OP1dB of +16 dB min. The operating voltage
is +12VDC and the current draw is 300mA max. The unit is supplied with removable SMA(F) connectors
in our standard PE2 housing.
Feature Test Report
About Planar Monolithics Industries
Planar Monolithics provides its unique
products for applications in space, military, communications, telecommunications, commercial,
and consumer electronics systems. Planar Monolithics Industries, Inc. has been set up to manufacture
and market various MIC/MMIC (Microwave Integrated Circuits and Monolithics Microwave Integrated
Circuits) Components, Supercomponents, and Subsystems for applications in Telecommunications,
Terrestrial, Satellite, and Mobile-Radio Communications, Defense (ECM, ECCM, ESM, Radars, and
Electronic Warfare), Cable-TV, Navigation and Marine Electronics, FAA/DOT-Avionics, Ground Based
Systems, and Microwave Landing Systems. Contact
Planar Monolithics Industries Inc.
Frederick, Maryland 21704, USA
Phone: (301) 662-5019
Posted October 29, 2013