PMI Intros 100 MHz to 40 GHz High Speed SP4T Absorptive Switch
February, 2013 Press Release
PMI Model No. P4T-100M40G-90-T-512-292FF-SP is a 100 MHz to 40 GHz, Ultra-Compact, High Speed, Single Pole, Four Throw, Absorptive Switch. This switch offers over 100 dB of port to port isolation from 100 MHz to 18 GHz, over 90 dB from 18 to 26.5 GHz and over 75 dB from 26.5 to 40 GHz. This switch has a typical insertion loss of 8.8 dB from 100 MHz to 18 GHz, 5.2 dB from 18 to 26.5 GHz and 5.6 dB from 26.5 to 40 GHz. The switching speed is less than 100 nsec and is controlled by 2-Bit decoded TTL. The maximum operating power is +20 dBm CW and the typical VSWR is 2.0:1. The compact housing measures only 2.0" x 1.0" x 0.4" and is supplied with 2.92 mm female connectors.
About Planar Monolithics Industries
Planar Monolithics provides its unique products for applications in space, military, communications, telecommunications, commercial, and consumer electronics systems. Planar Monolithics Industries, Inc. has been set up to manufacture and market various MIC/MMIC (Microwave Integrated Circuits and Monolithics Microwave Integrated Circuits) Components, Supercomponents, and Subsystems for applications in Telecommunications, Terrestrial, Satellite, and Mobile-Radio Communications, Defense (ECM, ECCM, ESM, Radars, and Electronic Warfare), Cable-TV, Navigation and Marine Electronics, FAA/DOT-Avionics, Ground Based Systems, and Microwave Landing Systems.
Planar Monolithics Industries Inc.
7311-F Grove Road
Frederick, Maryland 21704, USA
Phone: (301) 662-5019
FAX: (301) 662-1731
Posted / /2013