|More than 8,000 searchable pages indexed.|
Your RF Cafe
Airplanes and Rockets:
Check out our new Websites!
For Custom Products Our Webstore
Whether you’re designing broadband defense systems, HF, VHF, and UHF radios, or wireless systems that demand the lowest possible IMD, Anatech has hundreds of standard models to choose from. The four models below are terrific examples of our design expertise at work and many more are available at www.AMCrf.com.
For more information please contact us at: email@example.com
3-way Power Divider for HF, VHF Systems
AM100PD1083 is a three-way power divider that operates from 1 to 200 MHz and has isolation of 20 dB,
insertion loss of less than 0.5 dB, and maximum VSWR of 1.3:1. Amplitude balance is better than 0.2 dB and phase
balance is 2 deg. The power divider is available with SMA female, TNC female, or Type-N female connectors,
measures 1.25 x 1.25 x 0.75 in., and has an operating temperature range of -40o to +60o C.
800 to 2500 MHz, 150 W, Low IMD 4-Way Power Divider
The AM1650PD873 is
a broadband four-way power divider that operates from 800 to 2500 MHz and handles 300 W CW. Its low IMD of -150
dBc or better makes it well suited for wireless base station and other applications in which very low distortion
is critical. The power divider has insertion loss of less than 6.3 dB, isolation of at least 17 dB, and input
and output VSWR of less than 1.25:1. The power divider uses SMA female connectors, measures 1.25 x 1.25 x 0.75
in., and has an operating temperature range of -30 to +60 C.
5 to 500 MHz 2 Way Power Divider Covers HF to UHF
AM252PD888 two-way power divider operates from 5 to 500 MHz with very low insertion loss of 0.8 dB or less,
isolation of at least 18 dB, amplitude balance 0.5 dB, phase balance 5 deg., maximum VSWR of 1.4:1, and power
handling ability of 50 W. It uses Type-N female connectors, operates over a temperature range of -40o to +70o C,
and measures 2.1 x 2.1 x 1 in.