|
|
Z-Communications Intros New 4000 MHz Synthesizer for Satellite Communications
|
October 30, 2012 Press Release
--
Fixed Frequency Synthesizer: SFS4000C-LF Features Low Phase Noise
Z-Communications, Inc. announces a new
RoHS compliant Fixed Frequency Synthesizer model SFS4000C-LF for Satellite Communications and Test Equipment. The
SFS4000C-LF is a single frequency synthesizer that is phase locked at 4000 MHz while using a 10 MHz reference.
This coaxial resonator PLL features remarkable phase noise of -102 dBc/Hz @ 10 kHz offset and typical sideband
spurs of -65 dBc.
The SFS4000C-LF is designed to deliver a typical output power of 0 dBm into a 50Ω load
while operating off a VCO voltage supply of 5 Vdc and PLL chip voltage of 3.3 Vdc, each drawing 30 mA and 11 mA,
respectively. The innovative, low phase noise device is designed to operate over the extended commercial
temperature range of -25 to 90ºC. The SFS4000C-LF features typical 2nd harmonic suppression of -15 dBc and comes
in Z-Comm's industry standard PLL-V12C package measuring 0.60 in. x 0.60 in. x 0.22 in. It is available in tape
and reel packaging for production requirements making it ideal for automated surface mount assembly and reflow.
The SFS4000C-LF is also well suited for satellite communications and test and measurement applications that
require low phase noise performance. Additional specifications for this product can be found on-line at www.zcomm.com. Download
the SFS4000C-LF
datasheet.
For further information on this model or any other product from Z-Communications, Inc. please contact our
Applications department via e-mail at
applications@zcomm.com or call
us at 858-621-2700.
About
Z-Communications, Inc.
Z-Communications, Inc. is a pioneer in developing Voltage Controlled Oscillators
(VCO) and Phase Locked Loop (PLL) synthesizers for the commercial marketplace since 1987. With devoted customers,
Z-Communications, Inc. serves wireless and communication industries by providing the most effective and competitively
priced RF/microwave components, as well as custom component designed to meet customer specific needs. Our sophisticated
automated manufacturing facility, located in the US at our headquarters in San Diego guarantees a high level of repeatability,
reproducibility and control. For more information please visit us at
www.zcomm.com or contact our sales department.
Contact: Z-Communications, Inc. Phone: (858) 621-2700 Fax: (858) 486-1927 URL:
http://www.zcomm.com Email:
mailto:applications@zcomm.com
Posted 11/1/2012 |
|
|